Examples of 'pipes must' in a sentence
Meaning of "pipes must"
Pipes must: This phrase suggests that there is a requirement or necessity for pipes to be installed, repaired, maintained, or operated in a specific manner or location
How to use "pipes must" in a sentence
Basic
Advanced
pipes must
The refrigerant pipes must be as short as possible.
Pipes must have as few joints as possible.
Perforated drainage pipes must be of high quality.
The pipes must all be perfectly sealed.
He who fitted the pipes must fix the leaks.
These pipes must lead to a building or something.
The safety and filling pipes must be protected against.
The pipes must have become confused.
Water leakage from the roof or pipes must be quickly repaired.
These pipes must lead to a buildingor something.
The entire outer surface of steel pipes must be treated against corrosion.
Pipes must be clean and dry before gluing.
Contaminated hydraulic pipes must be cleaned by a specialist company.
Pipes must consist of fixed steel or copper tubing.
Why lead pipes must be removed.
See also
Pipes must be something or something.
The canalization pipes must all have an equal length in.
Pipes must be connected starting from the indoor unit.
Plastic pipes must be laid.
Pipes must be carefully sloped to prevent trapped condensate blockage.
The sulfur in the pipes must have stuck to his skin.
All pipes must be physically disconnected or isolation blanks bolted in place.
The condensing unit and belonging pipes must of course be dimensioned for this.
Oil pipes must be completely tight.
The three flanged unions on the water pipes must then be loosened see diagram.
These pipes must be installed so that they are never.
The suction / blowing pipes must be assembled be.
The pipes must be supported at their first joint.
Signboards on containers and pipes must be placed as laid down in Annex III.
The pipes must be totally dry to enable the epoxy to adhere.
During shaft operation telescopic pipes must overlap by at least one third of their length.
Pipes must be secured using suitable clips and protected against corrosion.
If necessary, separate air supply pipes must be installed.
The pipes must be taken apart.
Nevertheless, leaks in main pipes must not be overlooked.
Heat pipes must be tuned to particular cooling conditions.
In this case, drains and sewage pipes must have already been installed.
The pipes must be bursting upstairs.
The insulation around the copper pipes must be at least 6mm thick.
The pipes must still be dirty.
At high points in sections with pressure flow, the pipes must be ventilated.
The hot water pipes must be thermally insulated.
The replacement exhaust system or its components, excluding fixing hardware and pipes must bear.
These pipes must be installed so that.
After having been cleaned and disinfected, pipes must be rinsed out with potable water;.
These pipes must be clogged all over the place.
For this reason, the metal used for the pipes must accept plastic deformations.
Exhaust pipes must not protrude from the body.
Before commissioning the fan, the casing and the duct pipes must be checked for contaminants.
Water and steam pipes must only be connected by authorised personnel.
