Examples of 'plastic flow' in a sentence
Meaning of "plastic flow"
plastic flow: This may refer to the movement or deformation of plastic materials under pressure or heat, often used in manufacturing processes
Show more definitions
- Any fluid flow in which movement is proportional to the applied force (above the yield value).
- Any deformation caused by a sustained force.
How to use "plastic flow" in a sentence
Basic
Advanced
plastic flow
Plastic flow sensor for humid conditions.
Hydrogen may also affect the plastic flow behaviour of metals.
Useful elastomers are synthetic high polymers which exhibit plastic flow.
Intermittent plastic flow has been observed in several different systems.
The edge fillet also serves to allow smooth plastic flow.
The amount of plastic flow increases rapidly as temperature is increased.
Three series of samples were prepared in order to test their resistance to plastic flow.
It often results in a localization of plastic flow which acts as a precursor of failure.
The plastic flow and the density obtained after calendering were observed.
This is as a result of elastic or plastic flow in the material of the fastening.
The plastic flow temperature is then selected to lie between said two temperatures.
It is also possible to set the plastic flow to better control the amount.
Useful elastomers can include synthetic high polymers which exhibit plastic flow.
Visualize the plastic flow front and check if the part will fill the mold completely.
Part of the decomposed energy is consumed while producing a plastic flow in the workpiece.
See also
The so-called plastic flow of the film begins at this point.
Experimental data highlight a viscoelastic behaviour subject to damage and an anisotropy induced by plastic flow.
This can cause adhesion, plastic flow and even fracture.
A semisolid does not flow at low shear stress and generally exhibits plastic flow behavior.
As a part of such welding, plastic flow at the weld interfaz occurs.
The deformation of the cylindrical rim is the result of a plastic flow phenomenon ;.
With a certain degree of force, a plastic flow of metal is produced through the die.
For some materials, the transition from elastic deformation to plastic flow is.
With a certain degree of force, a plastic flow is produced through the die.
The counter-pressure ensures control over the unstable plastic flow.
The local peak B is attributed to a plastic flow threshold of the preform 3.
The face of the screw 16 effectively defines a boundary surface of the plastic flow path.
The local peak B is assigned to a plastic flow threshold of the preform 3.
After the initial deformation occurs, the additional deformation is called creep, or plastic flow.
From a certain pressure, there is plastic flow through the die.
The plastic flow medium 103 is used for achieving two-dimensional diffusion uniformity of fluid plastic.
Cable Assembly Metal ring is integrated into plastic flow control knob.
Our low-cost, plastic Flow Restrictor eliminates these issues by slowing the thinner component 's flow.
However, the characterization of the transition towards the plastic flow regime remains an open issue.
This plastic flow leads to a significant weakening of the seal produced by these surfaces 16, 23.
Various samples were prepared from the composition of Example 2 and subjected to plastic flow tests.
FIG . 6 is a view showing a condition of plastic flow in the material by the rotary tool ;.
The pressure on ice deeper than 50 m causes plastic flow.
The plastic 16 impregnated to the plastic flow medium 22 is impregnated to the fiber laminate 15.
FIG 3 is a cross section of a turbine blade showing the direction of plastic flow for masking.
Nevill Francis Mott, Dislocations, plastic flow and creep in metals.
In the infiltration, the plastic 16 having flowed in is guided by the plastic flow medium 22.
Uh, we call this plastic flow.
A flow restrictor 222 through shaft 210 exists for proper plastic flow into the mold at injection.
You'll also be interested in:
Examples of using Plastic
Show more
Wrap it in a plastic bag to prevent freezer burn
We think he maybe used tarps or plastic sheeting
I sell plastic canoes and refrigerator magnets
Examples of using Flow
Show more
I let the anger flow right through me
The flow of information is a two way street
Insufficient air flow through burn grate
