Examples of 'plastic nut' in a sentence
Meaning of "plastic nut"
plastic nut: a small piece made of plastic used to secure or fasten objects together
How to use "plastic nut" in a sentence
Basic
Advanced
plastic nut
Tighten the plastic nut on the black hub.
Secure the opening in the actuator body with a plastic nut.
Unscrew the plastic nut on the front of the.
Push the guard firmly into place and secure with the plastic nut.
A black plastic nut connects the cable to the linkage.
Gas will not flow unless the plastic nut is completely connected.
Plastic nut must only be tightened by hand!
White plastic nut.
Hold the lamp firmly and unscrew the plastic nut D.
Check that the plastic nut is fully tightened to avoid vibration.
Secure the rear guard with the plastic nut TIGHTEN.
Install the plastic nut onto the back of the niche.
Tighten transmitter housing to fitting with plastic nut 3.
One plastic nut.
Screw on, and tighten the big plastic nut.
See also
Screw on the plastic nut to secure the rear guard in place.
The locking nut is captive, hidden in a plastic nut holder.
Dismount the plastic nut and the upper gearbox cover.
Hold the light firmly and unscrew the plastic nut 5.
Tighten the plastic nut of the fastening bolt turning clockwise.
Remove the adhesive tape, and then loosen the plastic nut on the black hub.
Remove the large plastic nut on the lower part of the electrical part.
All accessory coils come with a protective skidplate, two washers and a plastic nut and bolt.
For slackening and tightening the plastic nut use a coin or similar object.
When connecting the regulator / burner valve assembly to the tank valve, turn the large plastic nut.
Hold the black plastic nut tightly while cranking the silver lever to tighten.
If still attached, remove the plastic nut LOOSEN.
Turn the large plastic nut counter-clockwise until it is disassembled.
Installing the Sensor Modules Remove the plastic nut from the sensor module 1.
Tighten the plastic nut to keep the sensor module safely in place 4.
Cable tensioner according to any of preceding claims, wherein the actuator ( 6 ) is a plastic nut.
Install the rubber washer and the plastic nut on the threaded end of the cell.
Insert plastic nut 3 into fitting and let plastic ring 2 snap into guide bush 5.
To adjust the height of the Suspending Arm ( 2 ), unscrew the plastic nut immediately above the.
Screw the white plastic nut of, Remove the plastic lid and (Kabe in caravan).
Tell her . One plastic nut.
Loosen the plastic nut ( 2 ) in a clockwise direction and the plastic nut ( 5 ) in an anticlockwise direction.
Recuperation, An onduffil, a white plastic nut and an AVX.
Remove the spinner and the plastic nut from the front side of the motor.
Clamp of claim 1 or 2 including a molded plastic nut thread 74.
You'll also be interested in:
Examples of using Nut
Show more
I am kind of a hard nut to crack in that department
A nut who knows a lot about bombs
Loosen the bottom nut to eliminate water
Examples of using Plastic
Show more
Wrap it in a plastic bag to prevent freezer burn
We think he maybe used tarps or plastic sheeting
I sell plastic canoes and refrigerator magnets
