Examples of 'plastic plugs' in a sentence
Meaning of "plastic plugs"
Plastic plugs are small devices made of plastic that are used to fill or seal holes, gaps, or openings. They are commonly used in construction, plumbing, and electrical work to prevent air or water leakage
How to use "plastic plugs" in a sentence
Basic
Advanced
plastic plugs
Remove plastic plugs from side of doors.
Do not throw away the plastic plugs.
Remove plastic plugs from top of refrigerator cabinet.
The holes are sealed with plastic plugs.
They are sealed with plastic plugs as transport protection.
Aluminium profiles with magnetic plastic plugs.
Remove plastic plugs from side of refrigerator cabinet.
Relocate the handle and the plastic plugs to.
Use the plastic plugs on the weight as a guide.
Reinstall the four plastic plugs.
Remove plastic plugs from top of cabinet and door.
Secure the tray by using the plastic plugs.
Plastic plugs are not permitted.
Better fi re resistance than plastic plugs.
Insert the plastic plugs into the holes and.
See also
Close the upper ends with plastic plugs.
Plastic plugs attached to the plastic drop ceiling mount ring.
Holes are to be closed with plastic plugs included to a supply set.
Seal all unused openings with screws or plastic plugs.
Remove the plastic plugs from the mounting flanges of the refrigerator.
Seal the gaps using the plastic plugs provided.
Put the plastic plugs into the mounting flanges of the refrigerator.
The plugs can for example be plywood or plastic plugs.
First remove the plastic plugs covering the screws with a spudger.
Close off the holes using the plastic plugs provided.
Remove the white plastic plugs from the sides of the refrigerator interior.
The rivet holes can be covered with the plastic plugs provided.
Reinsert the plastic plugs on the side from which the door was removed.
Remove the screws and switch with plastic plugs in the opposite wall.
Remove the plastic plugs from the bores on the rear side of the brake.
Close off the holes using the plastic plugs supplied in the pack.
Solar Innova launches solidarity campaign recycling plastic plugs.
Insert to the holes special plastic plugs that are supplied with the set.
The holes that are not used are to be masked with the plastic plugs removed.
Press the supplied plastic plugs into the holes to which the handle was previously fitted.
Reinstall the glasses storage box by first inserting the plastic plugs and then.
Plastic plugs and caps Plastmark Yritys.
Inside the dispenser are two gears and two plastic plugs which help secure the cartridge.
Take the plastic plugs out of the bores at the back of the coil carrier 2.
F Fit the side rail beams onto the plastic plugs.
Remove the plastic plugs from handle holes 4x.
Fasten together using two plastic plugs YY.
Insert the 4 plastic plugs into the drilled holes.
Fasten together using plastic plugs CC.
The plastic plugs fit into the slots on the ends of the 4 side rail beams.
NEVER operate the Machine without plastic plugs installed as required.
These holes, referred to as stress-relief holes, are generally closed by simple plastic plugs.
In this case, standardised plastic plugs can be used.
Remove both plastic plugs ( 1 ) with a sharp implement needle, etc.
In each of these runs a plastic slide with 4 plastic plugs.
You'll also be interested in:
Examples of using Plugs
Show more
Appliance plugs must match the outlet
Clean magnetic engine oil drain plugs
Power tool plugs must match the
Examples of using Plastic
Show more
Wrap it in a plastic bag to prevent freezer burn
We think he maybe used tarps or plastic sheeting
I sell plastic canoes and refrigerator magnets
