Examples of 'plasticization' in a sentence
Meaning of "plasticization"
plasticization (noun): The process of converting something into a plastic-like form or state, or the act of applying a plastic coating or material. It is commonly used in the context of manufacturing, chemistry, or materials science
Show more definitions
- The process of making something more plastic
How to use "plasticization" in a sentence
Basic
Advanced
plasticization
Sorbitol plasticization significantly improved creasing resistance.
This could be characterized as over plasticization.
There is then an effect of plasticization of the thermoplastic matrix.
Plasticization of a resin leads to a drop in its mechanical properties.
The process is called plasticization.
Furnace plasticization through phosphating and then polymerizing.
This latter observation is interpreted to reflect the plasticization of polycarbonate by nitrogen.
For plasticization it is possible to have recourse to established compounds.
The carbon facilitates the plasticization reaction with the sulfur.
The plasticization was performed in two steps.
Once again the process begins at the material plasticization stage.
The plasticization drawing bath solution has no particular restriction.
The material is molded by setting different temperatures of the plasticization cylinder.
Good plasticization effect.
The polymer had a lower elasticity as a result of the low degree of plasticization.
See also
External plasticization of adhesives.
The glass transition temperatures of xylitol and sorbitol decreased as a result of water plasticization.
Plasticization and blending of electrically conductive polyaniline by using specific interactions.
This effect may be attributable to plasticization of the membrane material by sorbed hydrocarbon.
Plasticization can be described as the ability for a plasticizer to soften a polymer film.
Especially suitable are plastics having a plasticization temperature in the vicinity of body temperature.
Such plasticization can undesirably affect the physical properties of the resulting foam.
Use of an inorganic blowing agent enables plasticization and glass transition temperature to be controlled.
This plasticization may occur when the sulfur is mixed with the hot asphalt.
This change could be related to increased plasticization of the foam by the flame retardant.
This avoids plasticization of the adhesive and reduction of adhesive strength.
Dimensional stability is also improved as a result of wood plasticization and enhanced resin cure.
Incompatibility avoids plasticization of the pressure sensitive adhesive by the swelling agent.
The solvation of PHEMA is the start of its plasticization.
After the plasticization the material is shaped for example by spheronizing or by extrusion.
Improvement in mechanical properties upon plasticization is also revealed by the DMTA results.
This limited plasticization can also be evaluated by a hardness test of the dried film.
The copolyesters are particularly useful for the plasticization of PVC pressure sensitive electrical tape.
If too much plasticization takes place the cores could become difficult to process.
Loss of IV occurs mainly during plasticization of PET in the extruder.
The plasticization results from at least a portion of the supercritical fluid dissolving into the particles.
Advantage Uniformed plasticization high efficient extrusion.
Plasticization of the PET happens in the extruder.
In a preferred embodiment, the plasticization takes place in the second stage.
Sorbitol plasticization and citric acid crosslinking are examples of possible modification routes using safe chemicals.
No separate heat pre-treatment plasticization step before shaping is necessary.
Plasticization due to the action of the heat ;.
They were also susceptible to cracking when creased, despite their plasticization.
As an alternative, plasticization by reactive extrusion was recently developed.
However, this plasticizing blend is not completely satisfactory in terms of rate of plasticization.
However, plasticization to too great an extent can also be undesirable.
In some embodiments, the residual load is absorbed by plasticization of titanium alloy nails.
Plasticization of starch by water, glycerol, sorbitol and citric acid is studied.
However, there are only few studies on the plasticization behavior of mixed matrix membranes.
Thus, if more plasticization is desired, the amount of the plasticizer can be increased.
