Examples of 'plumbing codes' in a sentence
Meaning of "plumbing codes"
Plumbing codes: These are regulations and standards that govern the design, installation, and maintenance of plumbing systems in buildings and structures. Plumbing codes are enforced by local authorities to ensure that plumbing work is done safely, efficiently, and in compliance with building codes. They cover aspects such as pipe materials, pipe sizing, fixture placement, and drainage requirements
How to use "plumbing codes" in a sentence
Basic
Advanced
plumbing codes
Check local plumbing codes for guidelines.
Observe all local and plumbing codes.
Consult local plumbing codes for proper drainage.
It application is based on standards set by plumbing codes.
Some local plumbing codes require backflow prevention.
Comply with local plumbing codes.
All plumbing codes require backflow prevention in several ways.
Follow all local plumbing codes.
Some local plumbing codes require backflow prevention when connecting to.
Septic tank is to be vented in accordance with local plumbing codes.
Consult local building and plumbing codes prior to installation.
Installation must comply with state and local plumbing codes.
Consult your local plumbing codes and install accordingly.
Comply with all state and local plumbing codes.
Check local plumbing codes for approved plumbing procedures and accessories.
See also
Check and comply with local plumbing codes as you plan.
Flexible drain hose is not allowed in all localities check your plumbing codes.
Some local plumbing codes require backfl ow prevention when connecting to a fresh water supply.
Septic tank must be vented in accordance with local plumbing codes.
National Plumbing codes require a drain pan for any water heater installation.
Install the drain and supply pipes according to local plumbing codes.
If local plumbing codes permit, dishwasher drain hose may be connected directly to disposer.
All plumbing should be done in accordance with state and local plumbing codes.
Not all plumbing codes require air gaps, so you may not have one.
Plumbing connections must comply with all sanitary and plumbing codes.
Consult local plumbing codes for drain size, material, and maximum temperature allowed.
Check with your local public works department for plumbing codes.
Most plumbing codes require pressure-reducing valves on systems where pressures exceed 80 psi.
You are required to consult the local building and plumbing codes prior to installation.
American plumbing codes refer to a toilet as a " Water Closet " or a " WC.
The installation must be performed according to local electrical and plumbing codes and regulations.
Install the pressure relief valve according to local plumbing codes and these instructions.
Ensure that your water supply line connections comply with all local plumbing codes.
Check and comply with all state and local plumbing codes as you plan.
All plumbing work must comply with national and applicable state and local plumbing codes.
Metering pump installation must always adhere to your local plumbing codes and requirements.
Installation of this equipment must comply with all local, state / provincial and federal plumbing codes.
Chemical feed pump installation must always adhere to your local plumbing codes nd requirements.
Water connections to the tankless water heater should follow all state and local plumbing codes.
You must adhere to your state / local plumbing codes.
Damage or failure caused by incorrect electrical current, voltage, or plumbing codes.
Always consult local and national electric & plumbing codes.
Before installation, check your local electrical and plumbing codes.
Make sure installation complies with all electrical / plumbing codes.
Plumbing connections must comply with applicable sanitary, safety and plumbing codes.
This equipment must be installed to comply with applicable federal, state or local plumbing codes.
Before purchasing, make sure a saddletype valve complies with your local plumbing codes.
All plumbing must be completed in accordance with national, state and local plumbing codes.
Before purchasing, make sure a saddle type valve complies with your local plumbing codes.
All plumbing connections must comply with all applicable national, state and local plumbing codes.
You'll also be interested in:
Examples of using Plumbing
Show more
Does not have plumbing or wiring routed inside
Plumbing shall be installed in accordance with the
My dad ran a plumbing and heating company
Examples of using Codes
Show more
Subject codes assigned to the notices to skippers
Observe all local codes and ordinances
Codes of technologies used and level of development
