Examples of 'point is set' in a sentence
Meaning of "point is set"
Point is set - This phrase is often used in discussions or debates to summarize or emphasize a key argument or main point. It suggests that the focus or direction of the conversation has been established and should be acknowledged or considered
How to use "point is set" in a sentence
Basic
Advanced
point is set
The value of a point is set by each canton.
By pressing play a new cue point is set.
This data point is set to be the reference point.
This section describes how a connection to an access point is set up.
At that point is set to zero.
By stopping the wheel and pressing play a new point is set.
A single switch point is set in the center of the two taught targets.
The valid boundary may be defined when a reference point is set.
A cue point is set at the current position and the music begins playing.
The fence can be changed at any time before the home point is set.
If the cooling set point is set lower than the heating set point.
The icon appears on the playback position bar when the ending point is set.
The local set point is set at the required humidity after the furnace.
You can not connect to a network using WPS if your access point is set to WEP.
The turnon point is set in the factory and can not be adjusted by the user.
See also
For OVERSPEED sensing the signal set point is set above the normal operating speed.
Switch point is set for low level indication and the other set for a full condition.
E CUE Lights in cue mode and flashes repeatedly every time a new cue point is set.
Nates when the CUE point is set as well as the marking.
Indicator illuminates when the CUE point is set.
The starting point is set automatically AUTO CUE.
Statutes represent a legal document by which a Trade Point is set up.
This year, a composting point is set up on an experimental basis.
The CUE point is deleted as soon as a new CUE point is set.
By default, a camera point is set at the center of the drawing.
The CUE indicator illuminates when the CUE point is set.
Therefore, the binary point is set differently in the different processing steps.
For addition and subtraction, decimal point is set to all entries.
After a Loop Out point is set and this button is pressed again, it will return.
This button lights up when the Alpha-CUE point is set.
For multiplication and division, decimal point is set to the result of the calculation.
By stopping the record and pressing Play, a new point is set.
Typically a set point is set and a control range is also set, for ON / OFF control.
Therefore, a defined operating point is set before detection.
The cue point is set at the position where PLAY / STUTTER is pressed.
Each time PLAY is pressed after pausing, a new Cue Point is set.
A starting point is set at the coordinate X1.
By stopping the jog wheel and pressing PLAY, a new Cue Point is set.
The low lead impedance trip point is set by actively trimming resistor R9.
Each time Play is pressed after Pause, a new Cue Point is set.
The high impedance trip point is set by actively trimming resistor R8 after resistor R9.
To maintain this type of constant current, a constant biasing point is set for input transistors 2, 4.
If a point is set and the shooter rolls a 7 before rolling the point, you win.
With Vr2 the zero point is set.
The cut-off point is set at 30 seconds to prevent tissue damage.
RE01 appears on the display when this point is set.
The titration end point is set at a pH of 4.0 for an acid.
The ambient temperature set point is set to 20 C.
The split point is set to C4 ( left included ) by default.
Ensure that the heater set point is set to 30°C or higher.
You'll also be interested in:
Examples of using Point
Show more
I agree that is the point why we are here
The point is illustrated in the diagram below
Absorbing light to the point of making it palpable
Examples of using Set
Show more
These targets are set as cumulative national goals
Set days and time of regeneration or recharge
The units may be set to different channels
