Examples of 'polymer flow' in a sentence
Meaning of "polymer flow"
polymer flow: This term refers to the movement or flow of polymers, which are large molecules composed of repeating structural units. It is often used in the context of studying the behavior of polymers in various processes or applications
How to use "polymer flow" in a sentence
Basic
Advanced
polymer flow
High resistance polymer flow indicator cover.
Polymer flow to the gas phase reactor.
High resistance polymer flow meter float.
Polymer flow begins on the outside and is indicated by arrows.
Surface modifications as means to influence polymer flow properties.
This results in a polymer flow rate that fluctuates slightly.
Polymer flow begins on the inside and is indicated by arrows.
Inorganic particles will dissipate homogeneously in the polymer flow.
Acrylic polymer flow additive.
A cam pump for the production of alternating sequences of polymer flow pulses.
Such support can be required if the polymer flow has a particular high melt viscosity.
Extrusion through the die causes an increase in flow rate through the polymer flow stream.
This apparatus has a means for modifying a polymer flow through one of polymer supply channels.
Generally, narrower size distributions were noted with lower polymer flow rates.
The pressure difference then sets the polymer flow rate from the reactor to the vessel.
See also
To form the polymer melt, the polymer is heated sufficiently to form a molten polymer flow.
Lubricants may be included to improve polymer flow and coating properties.
An acrylic polymer flow aid ; and a cross-linking catalyst selected from organo-tin compounds.
The above specimens were cut out parallel to the polymer flow lines of the plates.
After drying, polymer flow index was measured.
The die and feedblock used are typically heated to facilitate polymer flow and layer adhesion.
The polymer flow passage extends through flow distribution plate or " breaker plate " 69.
Purification of a conventional polymer flow contaminated with PLA.
Gear pumps and / or purgeblocks can also be used to finely control the polymer flow rate.
Polymer flow rates ( unitless ) were measured on a Gilmont 0 flowmeter ( GFO ).
For many systems fixed plugs 13 are sufficient to prevent polymer flow from the plugged openings.
Excess polymer was purged in order to approximate a polymer flow rate of less than 1 gm / orifice / hr.
Details of an inlet runner arrangement for a second polymer flow are shown in Figures 16d and 16e.
Valve 36 is opened periodically to allow polymer flow downward through line 34.
You'll also be interested in:
Examples of using Polymer
Show more
Injected polymer compound shell in three sizes
We seem to be a bit light in the polymer sciences
High resistance polymer flow indicator cover
Examples of using Flow
Show more
I let the anger flow right through me
The flow of information is a two way street
Insufficient air flow through burn grate
