Examples of 'polymer melt' in a sentence
Meaning of "polymer melt"
polymer melt ~ the state of a polymer material when it undergoes a transition from a solid to a molten or liquid form due to the application of heat or other external factors. It refers to the stage of a polymer where its molecular structure becomes fluid and allows for shaping or molding
How to use "polymer melt" in a sentence
Basic
Advanced
polymer melt
The polymer melt is then treated as described above.
To give a polymer melt and.
The polymer melt is then extruded and granulated.
The means containing the polymer melt is preferably an extruder.
The polymer melt was cooled and ground into flakes.
All of the components are mixed to form a homogeneous polymer melt.
Suitably the polymer melt includes at least one stabiliser.
The grafting reaction must occur in the polymer melt.
The polymer melt is pumped to a die for underwater pellet cutting.
The granules were melted and blended to form a polymer melt.
Using extruders to devolatilize polymer melt streams is known in the literature.
It is known practice to inject pressurized gases into the polymer melt.
Then the obtained polymer melt is normally mixed and pelletized.
The first extruder melts the polymer to produce a polymer melt.
A polyolefin may also be added to the polymer melt as an additional additive.
See also
An effective amount of a blowing agent blend is dissolved in the polymer melt.
Long relaxation times lead to a higher polymer melt strength or elasticity.
The polymer melt is spun from the spinning nozzles into a yarn.
A laboratory test was developed to give an indication of the polymer melt strength.
This is added into the polymer melt at the beginning of each run.
A spinneret is a device used to extrude a polymer solution or polymer melt to form fibers.
The polyester polymer melt phase product may also contain stabilizers.
It also improves the homogeneity of polymer melt in the spin pack.
A preferred method of incorporating additives would be incorporation of a liquid into a polymer melt.
This situation is achieved by the polymer melt wetting the fibres.
It is also possible to introduce the chemical compound into the polymer melt.
Secondly the mixture of absorbers and polymer melt is mixed with a compatibilizer.
Preferably the metal compounds are in a form which is soluble in the polymer melt.
Then the emerged mass of the polymer melt is detected as a function of time.
The spin temperature was decreased to correspond to the decreased polymer melt temperatures.
A polymer melt is applied by cold molding to the entire inner surface of the crown.
It would be desirable to find a carbon black which readily disperses in a polymer melt.
The water of the polymer melt was stripped off with a small nitrogen flow.
Decreasing the catalyst surface área produces an increase in the polymer melt index.
The inlet port for the polymer melt moreover provides a filter cartridge.
The polymer particles as polymerised will when processed give a homogeneous polymer melt.
The polymer melt being spun would have gelled as its melt viscosity increased.
A blowing agent was added to the polymer melt in the mixer to form a foamable gel.
The polymer melt is pumped through a die specially designed for underwater pelletization.
This is because the viscosity of the polymer melt of such a material is exceedingly high.
Physical blowing agents are gasses which are injected directly into the polymer melt.
In the mixing zone the polymer melt is mixed for achieving a homogeneous mixture.
The distributor comprises a horizontal inlet from the prehater to receive polymer melt.
This enables reliable removal of the polymer melt from the reaction space.
Still alternatively a substantially rigid tray can be obtained by injection moulding of a polymer melt.
Various imidization processes in a polymer melt have been known in the art for some time.
Dead spots typically arise from barriers extending perpendicular to polymer melt flow.
The resulting filled polymer melt is cooled and ground to the desired particle size.
In an embodiment of the invention the thermoplastic polymer tubing is extruded from a polymer melt.
The reference does not contemplate passing the polymer melt through a flash chamber devolatilizer.
You'll also be interested in:
Examples of using Melt
Show more
It will melt all over the floor
They are just gonna melt the icing
To melt the ice off your girl
Examples of using Polymer
Show more
Injected polymer compound shell in three sizes
We seem to be a bit light in the polymer sciences
High resistance polymer flow indicator cover
