Examples of 'polymer properties' in a sentence
Meaning of "polymer properties"
refers to the characteristics, qualities, or attributes of polymers, which are large molecules made up of repeating subunits. It encompasses various aspects such as strength, flexibility, heat resistance, and chemical stability
How to use "polymer properties" in a sentence
Basic
Advanced
polymer properties
Polymer properties are measured in the absence of additives.
This results in an improved balance of polymer properties.
Polymer properties varying diamines and isocyanate.
Percent solubles is a measure of two polymer properties.
Discussion of polymer properties relevant for their processing.
The suitable foaming temperature depends on polymer properties.
Process and polymer properties modelling.
Polymer properties were tested by standard techniques.
The structural modifications have been correlated with polymer properties.
The polymer properties are then validated.
Several methods have been employed to improve various polymer properties.
The polymer properties were then validated.
Processing lubricants can also be added to enhance polymer properties.
Polymer properties determine carbon dioxide solubility in coating formulation.
The inventive examples have an excellent balance of polymer properties.
See also
Polymer properties of all inventive example and comparative examples.
Modifying the propylene polymer properties by blending with elastomers is known.
Levels of structure of polymer materials and their influence on polymer properties.
Many relevant polymer properties can be characterized using rheological tests.
Determination of polymer properties.
The lower limits of reaction temperature are determined by the desired polymer properties.
Degradation causes the polymer properties to suffer and is a significant disadvantage.
Use of mixtures of SCAs in order to adjust polymer properties is also known.
One of the important polymer properties is the molecular weight of the polymer.
Copolymers of starch may also be synthesized to tune polymer properties of starch.
Polymerization conditions and polymer properties are shown in the accompanying tables.
The inventive examples have the claimed balance of polymer properties.
The use of these equations to calculate polymer properties in multimodal polymers is common place.
Too little grafting compound does not improve or enhance the polymer properties.
Improvement of polymer properties is a dominant factor in the development and production of olefin polymers.
Catalyst yields are improved and a better control of the polymer properties is obtained.
Different polymer properties may be desired depending on the intended use of the polymer.
The catalyst could be selected as desired in view of the ultimate polymer properties.
The propylene polymer properties are selected in a known manner to be suitable for film preparation.
Catalyst systems comprising organochromium compounds can also be used to modify polymer properties.
Thus the rate can be controlled by changing polymer properties influencing water uptake.
Catalyst systems comprising metallocene compounds have shown promise in tailoring polymer properties.
This capability allows the manipulation of polymer properties without having to change catalyst formulation.
Use of too little grafting compound does not improve or enhance the polymer properties.
Specific polymer properties and characteristics will be discussed in greater detail in the following section.
The development of these polymerization catalysts has improved catalyst and polymer properties.
The polymer sintering temperature varies with the polymer properties and is particularly sensitive to density.
Such a polyethylene free of long chain branches is advantageous due to adhesion polymer properties.
Trialkylboron compounds are effective agents to improve polymer properties and increase catalyst activity during polymerization.
The molecular weight of the polystyrene macromer also impacts the polymer properties.
The polymer properties experiment simply consisted of acquiring Raman spectra of polypropylene granules.
Using too small an amount of glass fiber does not improve the polymer properties.
Polymerization conditions and polymer properties are given in table I.
The lower limits of reaction temperature can be determined by the desired polymer properties.
The resultant polymer properties are set out in Table IIIB.
You'll also be interested in:
Examples of using Polymer
Show more
Injected polymer compound shell in three sizes
We seem to be a bit light in the polymer sciences
High resistance polymer flow indicator cover
Examples of using Properties
Show more
Check the acoustic properties of the medium
These properties will be useful in refrigeration equipment
If marked the below properties will be available
