Examples of 'poor adhesion' in a sentence
Meaning of "poor adhesion"
Poor adhesion: refers to a lack of sticking or bonding together of surfaces or materials. It is often used in the context of describing a weak attachment between two objects or substances
How to use "poor adhesion" in a sentence
Basic
Advanced
poor adhesion
Polished glass has poor adhesion to biomolecules.
Poor adhesion was demonstrated by film flaking in the squares.
This result indicates poor adhesion.
Typical poor adhesion and chipping of competitive carbide coatings.
This short residence time is a consequence of a limited or poor adhesion.
Poor adhesion between the concrete and the reinforcements.
They also tend to have poor adhesion to polymeric surfaces.
Poor adhesion can result in complete failure of the device.
Such tapes have poor adhesion to low energy surfaces.
Poor adhesion can lead to problems with variability on part geometry.
A further disadvantage of this film is poor adhesion to the substrate.
This leads to poor adhesion between these two adjacent layers.
The surfaces become rough and develop poor adhesion properties.
Poor adhesion is a problem that is sometimes encountered with water reducible resins.
However metal layers have poor adhesion to cubic boron nitride.
See also
The resultant coating showed excessive sagging and poor adhesion.
Poor adhesion of glass fibers to matrix resins results in poor mechanical properties.
Polymeric films generally possess poor adhesion to inks and lacquers.
This wheel arrangement had been abandoned elsewhere because of its poor adhesion.
This result indicates poor adhesion of the adherent layer to the substrate.
Spray too thick or air drying too long might cause poor adhesion.
Poor adhesion can be encountered when water based coatings are applied to some substrates.
These laminates often suffer from poor adhesion between the layers.
These films had poor adhesion to glass and fair adhesion to polycarbonate and copper.
Such immiscible mixtures often have poor adhesion between the phases.
This is due to the poor adhesion immiscible polymers typically exhibit with each other.
The film showed high shrinkage combined with poor adhesion to the molding.
The poor adhesion may be due to the presence of the large olefinic mid block.
They also can prevent artificial snow from flowing away because of poor adhesion.
This disadvantage may lead to poor adhesion between the layers and to defective objects.
The films of the Polymer B derivative pulled away from the substrate due to poor adhesion.
Such coatings generally exhibit poor adhesion and tend to spall from the concrete structure.
However, such a fluoropolymer component exhibits poor adhesion.
This oxide scale frequently results in poor adhesion between a coating and the steel surface.
The pressure build-up is greater than in the case of poor adhesion.
Coatings having poor adhesion properties can separate from the metal substrate during the shaping process.
Another cause for loosening of the implants may be poor adhesion between bone and implant.
However, the poor adhesion of plastic poses a problem.
These attempts resulted in a layer having poor adhesion to the PVC substrate.
However, poor adhesion was obtained between the topcoat and the concrete.
A plastic film such as PET generally shows poor adhesion to a solar cell sealing film.
Further, the improper application or mixing of two-part adhesives can result in poor adhesion.
In particular, they have poor adhesion under shear.
If most of the film gets peeled off, it indicates poor adhesion.
Further, wax has poor adhesion properties to the skin.
But, some kind of materials have poor adhesion.
This may cause poor adhesion to the user 's skin.
Both are nice, glossy coatings which have poor adhesion to steel.
Grade 0 corresponds to very poor adhesion and 5 corresponds to excellent adhesion.
Furthermore, compositions using such derivatives have exhibited poor adhesion to the mesh.
You'll also be interested in:
Examples of using Poor
Show more
Poor staff management capacity at all levels
They ate that poor woman alive
The poor thing has suffered a lot
Examples of using Adhesion
Show more
Test for adhesion performance on wet surfaces
Transition from high to low adhesion surfaces
Very high adhesion and quick drying
