Examples of 'position and press' in a sentence
Meaning of "position and press"
position and press: an instruction to adjust something to a specific position and apply pressure or push on it
How to use "position and press" in a sentence
Basic
Advanced
position and press
Pin pleat in position and press pocket opening thoroughly.
Set the device to the calibrate position and press enter.
Place the adaptor in position and press down on the adhesive tabs.
Turn the corresponding knob anticlockwise up to the maximum position and press the knob.
Place the coving in position and press it into place.
Then use the arrows move to the desired C or F position and press.
Lift the lid to the open position and press the awake button.
To install again the upper spray arm, put it in position and press.
Adjust camera to desired center position and press button to set new camera center.
To skip VIDEO1 input, move the cursor to the left-most position and press.
Lower dumbbell to starting position and press other dumbbell up.
Bring the iron up to the garment in the vertical position and press the SUPER.
Move mower lever to desired position and press lever forward momentarily to lower selected mowers.
Use keys to shift the TV channel to the desired position and press OK again.
Hold the iron in vertical position and press and release the shot-of-steam button Fig . 7.
See also
To issue an X report, set the mode switch to the X / F position and press t.
Rotate dust cover up into closed position and press into place without pinching dust bag.
Turn the thermostat and selector knobs back to 0 position and press the manual key.
Rotate bag holder into closed position and press into place without pinching dust bag.
Set the device to the surface position and press enter.
Open the appliance to the flat position and press the grill / griddle plate release buttons.
Move the telescope to a desire position and press ENTER.
Place the bread pans ( 6 / 8 ) in position and press down until they click into place.
Then, rotate the selection dial to the far right position and press the brew button.
Set the rotary switch to " " position and press twice on the yellow key.
To stop recording, move the slide switch to the f position and press the d RECORD key.
Hold the iron in vertical position and press the steam trigger Fig . 10.
Scroll to the desired character position and press the scroll wheel.
N Place the upper clamp in position and press it down.
Leave transmitter in neutral position and press the SET button once.
Turn the ignition switch to the ON or ACC position and press the time button.
Move the tape to the desired position and press the STOP button H.
Slide the Power Switch to the ON position and press the Power Button once to.
Rotate the basket to a horizontal position and press it down into the 4 alignment tabs.
Push and turn gas knob counter-clockwise to position and press ignitor button several times.
M / m buttons to select the desired position and press the OK button.
Turn control knobs to the 0 position and press button D.
Then press the / Buttons to a new position and press the Green Button to confirm.
Bring the saw blade to rest position and press the traverse lock 17.
Move it into the appropriate position and press the [ SET ] button.
Set the contact back to its normal position and press button ( 24 ) to restart.
You'll also be interested in:
Examples of using Press
Show more
Each press changes the display indication
Gordon has the press on his side
Press BACk to return to the previous menu
Examples of using Position
Show more
Then position the unit as shown below
Verify the correct position of the gasket
Try to position cages out of direct sunlight
