Examples of 'position figure' in a sentence
Meaning of "position figure"
refers to a person in a particular role or position of authority or importance
How to use "position figure" in a sentence
Basic
Advanced
position figure
Use the same position figure to create vertical guides for your horizontal outer borders.
Plug in charger and place the product in position figure B.
He was placed in the sitting position Figure 2, surrounded by some ether-parties participants.
Selecting the torque or drill position figure G.
Angiotomography Angio-TC was requested and showed a secondary aneurysm sac in a pararenal position Figure 1.
Release trigger to lock position Figure 6.
In order to standardize photography, the athlete remained standing at the standardized position figure 2.
Move throwout lever to OPEN position Figure 4.
The patient not subjected to the preparation had a calcified bioprosthesis in a semi-open position Figure 4.
Recline seat back to lowest position Figure 10.
This automatically positions the 4 cm long artery marking centrally above the pulse position Figure 3.
Push the grill up into position Figure 12.
Press the tubes attached to the seat downwards until they lock into position figure 1.
Put the lever in the OPEN position Figure 41.
An endoloop was placed at the base of the lesion in a retroflexed position Figure 2.
See also
Push and set to desired flexion position Figure 7.
The winch can be mounted in a horizontal or vertical position Figure 6.
Lift stroller into the upright position Figure 2.
The pneumoperitoneum is redone to check the jejunostomy position Figure 1.
Push and set to desired extension position Figure 7.
Preoperative photos were taken with the patient in a standing position Figure 1.
Snap the lever into the locked position Figure 5.
Tighten the locking screws by hand to the tightest possible position Figure 2.
Turn key and wand switch to the on position Figure 30.
The markings were confirmed with the patient in the supine position Figure 3.
Swing mounting bracket to OPEN position Figure 17.
Pull the jaw set mounting pin to its most open position Figure 2.
Turn key switch to the ” ON ” position Figure 4.
To ensure an easy installation, the handgrip must be opened to the maximum position figure “ 5 ”.
Turn red fuel valve to “ On ” position Figure 4.
To raise squeegee, step downward on pedal until pedal engages in the transport position Figure 14.
Turn the key ( C ) to the off position Figure 6.
Lower squeegee to floor, lightly kick pedal forward to release from transport position Figure 10.
The head will rise to the pad mounting position Figure 2.
Fold down the roll rack, Bring button ( Figure 1/J ) back up to its original position Figure 5.
Rotate the Table Bed into its use position Figure 16.
The latch on the back of the battery must be in the lower position Figure 3.
Set the rocker switch to “ On ” position Figure 5.
The stroller will automatically lock open in the normal use position Figure 8.
Turn the fuel valve to the " On " position Figure 2.
The stroller will fold and will automatically lock in the folded position Figure 11.
Control knob must be in the “ OFF ” position Figure 3.
Align the marks on the lever and on the skewer to the adjustment position Figure 47.
Control knobs must be in the “ OFF ” position Figure 1.
To replace the blades, put the smaller, upper blade back into position Figure F.
Make sure control knobs are “ OFF ” position Figure 3.
Set the Steam Select Dial in the desired steam level position figure 3.
Turn the key and the solution pump switch to the ON position Figure 7.
Lay the power stand flat on the floor in the desired position Figure 2B.
IMPORTANT STEP, Release the brush lift pedal from the transport position Figure 9.
You'll also be interested in:
Examples of using Figure
Show more
I figure they know pretty much where we are at
They can not figure out in time
I figure you are part of a gang task force
Examples of using Position
Show more
Then position the unit as shown below
Verify the correct position of the gasket
Try to position cages out of direct sunlight
