Examples of 'positive stop' in a sentence
Meaning of "positive stop"
A 'positive stop' is a mechanical device or mechanism that is designed to halt or restrict the movement of a part or component in a precise and controlled manner. It ensures that the movement stops at a specific position and prevents any further motion beyond that point
How to use "positive stop" in a sentence
Basic
Advanced
positive stop
Positive stop enforcement at interlocking home signals.
Pull up the positive stop locking lever.
Be repeated several times as there is no positive stop on.
A positive stop is provided to find this angle quickly.
Baffle is inserted properly when you feel a positive stop.
The plunger forms a positive stop for high degree of safety.
Check blade with square and adjust positive stop.
A positive stop device would allow a uniformity of drawout of the containers to be achieved.
Opening it until a click is heard allows a positive stop at that position.
Positive stop adjustment screws have been provided on each side of the saw arm.
Manual transmission is very efficient using the positive stop gear change mechanism.
A positive stop shall be required to limit travel to the designed fully open position.
The die holder will lock into one of the positive stop positions as desired.
Adjust positive stop adjustment screw to bring saw blade into alignment with the square.
The saw is equipped with an adjustable positive stop at 0.
See also
The terminal fastener ensures a positive stop and also can be utilized to tighten the assembly.
In addition, the weld design incorporates a positive stop.
Positive stop clamping system, ensuring simple and confident clamping.
Slide the shoe back into the 0 positive stop position.
Positive stop device 14 allows a uniformity of draw down of the containers to be achieved.
Slide the shoe forward to release it from the 0 positive stop position.
Hydro cylinder with a positive stop - control maximum slip extension, preventing casing damage.
Rotate the movable table so that the positive stop is set for 0.
Suitably, the guides provide a positive stop to facilitate accurate positioning of the flow control member.
A shoulder 32 is formed at a first end of the tablet holder to provide a positive stop.
The toggle assembly 50 serves as a positive stop and pressure holding device during injection.
Sanded edge not square * Table not square to sanding sleeve - Adjust positive stop for 90.
Adjust positive stop adjustment screw ( H ) to bring saw blade into alignment with the square.
The control knob is fitted with two positive stop positions, one.
Positive stop adjustment screw for 45 angles.
Insert lance into the gun and turn clockwise to positive stop as shown in Figure 19.
For safety 's sake, a positive stop for the single screw has been provided.
Ensure sleeve bolt is rotated full 1/4 turn until positive stop.
All balls, positive stop.
A vehicle suspension according to claim 7, wherein said spring means ( 16 ) terminates in a positive stop.
The shoulder 66 provides a locator surface for providing a positive stop for mounting the pipette 30 on a probe.
Lift the positive stop lever ( 11 ) and swing the head until the stop.
Opening it until a click is heard allows a positive stop at that position . Fig . 4.
This positive stop feature additionally provides a specific compression for the Bellville springs 124 and 136.
In an additional embodiment, the positive stop 70 engages an interior wall of the housing 16.
Loosen the mitre clamping knob ( 8 ) and lift the positive stop lever 7.
The female socket 60 includes a positive stop 64 for limiting penetration of the bottle 30 into the socket.
Retraction of the hydraulic cylinder 90 continues until the closure 24 abuts with positive stop member 96.
Pin marking gage 45 also includes a positive stop face 63 for mating with positive stop shoulder 53.
Note: The 45 degree has a fast and positive stop.
The shaft link 44 also provides a positive stop 70 integral with and extending from the lever arm 46.
A positive stop ( C ) Fig . 24 is provided to return the table to the zero position.
The second diameter 208 cooperates with valve bore 200 to provide a positive stop in the opposite direction.
You'll also be interested in:
Examples of using Positive
Show more
He hoped to see a positive attitude in that regard
Positive feedback from training participants surveyed
That is the positive side of the coin
Examples of using Stop
Show more
They would not stop killing sharks
Next stop menswear and sporting goods
That is not gonna stop me from trying
