Examples of 'potential-free' in a sentence
Meaning of "potential-free"
Potential-free is an adjective commonly used in the field of electrical engineering. It refers to a circuit, conductor, or terminal that is not electrically connected to a power source or ground. In devices and systems, potential-free components are essential for safety, isolation, and signal integrity
How to use "potential-free" in a sentence
Basic
Advanced
potential-free
Wiring diagram for potential-free switching.
Potential-free contact for additional signal device.
The current signal must be potential-free.
Outputs potential-free no yes no yes no yes.
Exchange of up to three signals via potential-free contacts.
Potential-free alarm contact in case of system failure.
Alarm signalling via potential-free contact module.
Potential-free contact to trigger alarm in control room.
Temperature sensor potential-free thermistor.
The potential-free switch contact is switched off automatically.
Two auxiliary outputs with potential-free switching contacts are available.
Potential-free switching contact for heat pump indoor unit.
There should not be any power on this contact potential-free.
Only use potential-free contacts that are suitable for low voltage.
Switching function triggered only by system devices or potential-free input.
See also
Status display and potential-free alarm signal for service requirements.
The switch interface is only adapted for connecting potential-free switches.
The potential-free modules need to be connected in a star-fashion to the distribution board.
The sensor input serves to connect a potential-free contact not shown in figure 3.
Potential-free opening or closing relay, or optocoupler with open emitter and collector.
Several phase detector loops or other potential-free switching inputs can be parameterised.
With the potential-free contact of the relay, monitoring consoles or signalling devices can be activated.
Process control with 2 pairs of potential-free relay contacts and analogue output.
With the potential-free contact of the relay, supervision consoles or signalling devices can be activated.
Units with analog or counting pulse inputs have potential-free switching outputs.
If the potential-free contacts of the relay outputs are supplied externally with a dangerous voltage, make.
The electronics also provides this differentiation as a potential-free output used in fail-safe control.
Potential-free switching contact S2S can be implemented as a normally closed or normally open switching contact.
External heat generator has a potential-free switching contact connection for heat request.
Both closing and opening of charging contacts takes place in current-free and potential-free conditions.
The supervision circuit allows supervision of a potential-free contact without energy consumption from the load circuit.
The condensate drain operates reliably without pressure loss and enables remote monitoring with a potential-free contact.
Eight other potential-free inputs are optionally available for each ONLITE central CPS station.
The digital input function can be used with both potential-free contacts and voltage signals.
POTENTIAL-FREE CONTACT The alarm signal can be relayed via a potential-free contact.
Both inputs are binary inputs for potential-free NO contacts.
Potential-free contacts only may be used.
Circuit breaker position double remote output Auxiliary contact potential-free.
The remote control switch must be equipped with a potential-free contact which is suited for 5 V DC.
One potential-free relay output.
Number of signal outputs 4 potential-free relay contacts.
Potential-free receiver, different frequencies.
Process control with 2 pairs of potential-free relays and / or analogue output.
Potential-free change-over contact for external alarm signal.
Maximum contact load of the output relay potential-free change-over contact.
Outputs 2 potential-free relays with changeover contacts.
Never switch the mains voltage via the potential-free switching contact!
Two potential-free outputs.
Binary inputs, can be connected to a push - button, a switch or a potential-free binary sensor.
Integrated potential-free alarm relay.
