Examples of 'poured into a mold' in a sentence
Meaning of "poured into a mold"
poured into a mold - This phrase is used to describe the process of pouring a liquid material such as molten metal, plastic, or concrete into a mold or container to shape and solidify it into a desired form
How to use "poured into a mold" in a sentence
Basic
Advanced
poured into a mold
The composition was then poured into a mold.
The slurry is poured into a mold and allowed to dry.
The melt was defoamed and poured into a mold.
Liquid metal is poured into a mold of uniform cross section.
The aerated melt was then poured into a mold.
Molten metal is poured into a mold that is surrounded by silica sand.
The stirred mix is then poured into a mold.
The material is poured into a mold thanks to its thixotropic characteristics.
The soap mixture is poured into a mold.
Then it is poured into a mold which is in the shape of the desired object.
Molten metal is poured into a mold.
It was then poured into a mold formed from a thermoplastic elastomer having the compositions,.
Melted chocolate in poured into a mold.
The mixture can be poured into a mold or cast alone or on a desired backing material.
The resulting mixture is then poured into a mold.
See also
This mixture was poured into a mold to manufacture crayon.
The fast initiation times require that the reacting chemicals be poured into a mold quickly.
They also may be poured into a mold or former.
The benzoxazine is melted, degassed and poured into a mold.
The mixture is then poured into a mold at room temperature.
After homogenization, the mixture is poured into a mold.
The solution was poured into a mold and allowed to dry.
The melt did become viscous, but it could be poured into a mold.
This mixture is then poured into a mold and allowed to set.
After blending the ingredients, each soap is carefully poured into a mold.
The slurry was immediately poured into a mold to form a casting.
This final slurry was mixed for approximately 5 minutes, after which it was poured into a mold.
The mixture is then poured into a mold and allowed to cool.
After mixing the resulting formulation, the formulation can be poured into a mold and cooled.
The mixture is then poured into a mold and left to harden.
Tomi Ungerer, who accepted difficult the established codes, never poured into a mold.
The mixture was then poured into a mold and allowed to cool.
The viscous liquid, or monomeric mixture, is well blended, deareated and poured into a mold.
The mixture of sand and binder is poured into a mold to be subsequently baked.
In second step 11, the mixture, which has to a certain extent gelled, is poured into a mold.
The stirred mixture is then poured into a mold to be cooled in that state.
The mixture was poured into a mold assembly consisting of two glass molds and a resin gasket.
In the past the liquid steel was poured into a mold to form ingots.
The solution is poured into a mold and a non-solvent added to cause the cellulose to precipitate.
The shaving aid composition can be poured into a mold prior to cooling.
This mixture is then poured into a mold and cooled to room temperature.
After smelting, the metal is poured into a mold.
The mixture is then poured into a mold and cooled to a solid form.
Polyethylene glycol 4000 was added to the solution, warmed and poured into a mold for suppository.
The molten soap is then poured into a mold and allowed to cool to a solid form.
The two components are mixed thoroughly for 15 seconds and poured into a mold in a 130°C oven.
The mixture is poured into a mold for suppository, and cooled.
The two phases are then combined and poured into a mold or into the final package.
The mixture was poured into a mold that had been preheated to 100 °C.
For example, the molten wax can be poured into a mold or container.
You'll also be interested in:
Examples of using Poured
Show more
You poured in water directly from a tap
They took water and poured it on me to wake me up
Poured a pint of whiskey into that boy
Examples of using Mold
Show more
They broke the mold on that one
Mold requires high humidity levels to grow
No one wants a mold of their own penis
