Examples of 'powder layer' in a sentence
Meaning of "powder layer"
powder layer - Powder layer: This phrase suggests a thin coating or covering of powder on a surface
How to use "powder layer" in a sentence
Basic
Advanced
powder layer
The powder layer thickness is the third descriptor.
An agglomerated porous powder layer was built up on the belt.
Powder layer after treatment.
It is preferred that the print is applied into a powder layer.
The powder layer was removed.
Holes are created that penetrate the dry alumina powder layer.
A reflective powder layer prepares the tooth for imaging.
The still wet scaffolds were then dipped in the thin powder layer.
This powder layer must be continuously removed to control filter resistance.
The solidification may also be obtained by depositing a binder on the powder layer.
Welding said powder layer onto said part by laser welding.
This system results in an excellent aspect of the powder layer for architectural uses.
The powder layer may also be obtained by high frequency scanning of a jet.
The humectants used herein are capable of acting as moisture sink for the powder layer.
The heating of the powder layer may be done by any heating means.
See also
This step can also take place before the application of the next powder layer.
A base colour powder layer can cover parts of or the full surface.
The panel comprises a core and the decorative surface comprises a print applied into a powder layer.
On the support a powder layer was selectively formed beside the silicalite crystals.
Measuring the thickness of said powder layer after compaction ;.
The powder layer may also be obtained by acceleration of the powder contained in receptacles.
If present, the protrusions are removed before forming and sintering a subsequent powder layer.
A powder layer of irregular thickness and density with regions of inadequate depth results.
Various methods are used to supply each new powder layer for three-dimensional printing.
The powder layer geometry is initialized using the results from the DEM simulation.
Of course, the led light emitting strips 6 can further be provided with a luminescent powder layer.
The powder layer may be levelled or otherwise dispersed by a scraper ( not shown ).
Background Art 3D-printing is a method where a powder layer is distributed on a surface.
Thus, the SiC powder layer covering the side walls also behaves as a SiC source.
By a mass so that the thickness of a powder layer at stand still to be 200 mm.
The luminescent powder layer 26 is made by mixing the luminescent powder and the transparent dielectric.
Recovering a multilayer compression candle, wherein each solid-fuel prill or powder layer mixture contains,.
The first powder layer L1 comprises a first base colour.
The powder spreading device 22 forms a tobacco powder layer B on the particle layer B '.
Powder layer compaction ; and.
Thereby the exposed parts of the powder layer 7 are melted to an interconnected structure 1 9.
Powder layer heating;.
The thickness of the compressed powder layer is about 0.6 mm.
A thin powder layer 4 is spread onto the worktable 1 by means of the powder dispenser 3.
A-depositing a powder layer on a holder ;.
Figure 4 schematically illustrates the layer levelling unit 7, when levelling a wood powder layer 23.
Further, a luminescent powder layer can be disposed around the light emitting strip 33.
The first print 16 is provided on a first powder layer L1.
A first powder layer L1 is applied on a board 6 as shown in figure 11b.
In this case the thickness of a powder layer was 400 microns.
Figures 1 and 2 are plan views of the powder layer 2 deposited on the belt 1.
You'll also be interested in:
Examples of using Powder
Show more
It is better to use powder detergent in this case
Dry powder rapid intervention hose reel
Not with colocasia powder surrounding you
Examples of using Layer
Show more
A layer is displayed independently from other layers
The usage of second layer additional purchase
Every layer seems to beat to a different tune
