Examples of 'power and ground' in a sentence
Meaning of "power and ground"
power and ground: Terms commonly used in electrical engineering to refer to the positive and negative connections in a circuit. 'Power' typically represents the supply of energy, while 'ground' serves as the reference point for electrical potential
How to use "power and ground" in a sentence
Basic
Advanced
power and ground
Two wires supply power and ground.
Power and ground wiring connections.
This interfaz also provides power and ground lines.
Air power and ground power join together.
Examples of this type of signals include power and ground signals.
You provide power and ground with your switch.
The aircraft will use existing battery technology for emergency power and ground operations.
Check power and ground wiring at amplifier and at battery.
You will need to check for power and ground at the horns.
The power and ground wires for the fuse.
Identify where a component gets its power and ground signal from.
Connect power and ground wiring as shown in appropriate wiring diagram.
Remove that panel and you will see the power and ground wires for the fuse.
Attach power and ground wires to the pressure switch as indicated.
Alternatively, a single line shielded by power and ground lines can be used.
See also
The power and ground wire size should be the same gauge.
Substrate 1 may also contain electrical conductors, for example for power and ground.
The power and ground planes are the means of distributing power.
Clarion recommends the use of at least 8 AWG wire for power and ground connections.
Feed the supply power and ground wires through WattStation enclosure holes.
Use a minimum of 14 AWG wire for power and ground field wires.
Power and ground connections to the individual components are made in a suitable conventional manner.
Carefully check all power and ground connections at the EHCU.
Power and ground connections for the control unit 130 are made in a conventional manner.
The resistance across the power and ground pins should be approximately 100 ohms.
Route all signal carrying wires ( RCA, Speaker cables ) away from power and ground wires.
Check all power and ground connections for frayed wires and loose connections.
If it is necessary to extend the power and ground wires, use 22 AWG wire.
Please see power and ground portion of this manual for correct system grounding instructions.
Use at least a 10 mm2 cross-section for the power and ground connection cable.
AWG power and ground wire recommended for optimal performance.
This only requires 2 leads for power and ground to be connected to the laser diode 104.
The power and ground are nickel-plated set-screw wire connectors and will accommodate 4 AWG.
In other words, the power and ground transmissions are provided by other means.
Check the power and ground wiring, then retest.
Wiring - Power and ground wiring.
You'll also be interested in:
Examples of using Ground
Show more
The place is ground zero for scummers
Ground levelling began the following day
The situation on the ground in my country is critical
Examples of using Power
Show more
Power to provide everything you find outside
Have a remarkable power to heal old wounds
Power to make every inmate pay rent
