Examples of 'power cutter' in a sentence
Meaning of "power cutter"
power cutter - a tool or device used for cutting with substantial force or ability
How to use "power cutter" in a sentence
Basic
Advanced
power cutter
Place the power cutter on the ground in a stable position.
Always wipe off spilt oil before using the power cutter.
Never operate a power cutter holding it with only one hand.
Move at least three meters away from the place where the Power Cutter was fuelled.
Clean the power cutter thoroughly and lubricate metal parts.
It can be quickly and easily mounted on the Power Cutter.
Do not put the overheated Power Cutter in dry grass or on any inflammable objects.
Power Cutter Dimensions overall length x overall width x overall height.
Do not leave fuelled up Power Cutter or fuel container in.
Place the Power Cutter on a stable surface and carry out the following assembly steps.
Before doing any work on the Power Cutter.
When working with the Power Cutter hold it firmly by the front and rear handles.
The mains / pressure water system is designed to be mounted on the Power Cutter.
The Power Cutter should be stored safely in a dry place.
Mounting to the cart and Power Cutter are very fast and simple.
See also
Operate the Power Cutter only if you are in good physical condition.
If a spill occurs, clean off the Power Cutter immediately.
Never use the Power Cutter while standing on scaffolding.
Before performing maintenance work switch off the Power Cutter - ( 27 ) and pull out the plug cap.
Store Power Cutter and fuel container away from direct.
When working with the Power Cutter always hold it with both hands.
Fill the power cutter fuel tank only to 314 capacity to allow for fuel expansion.
This groove will then guide the Power Cutter accurately guring the actual cutoff.
Start the Power Cutter only after complete assembly and.
Working with the Power Cutter requires high concentration.
Operate the Power Cutter only at a low noise and emission level.
Whenever possible run the Power Cutter at the rated arbour speed see - “ Technical data ”.
Only use the Power Cutter during good light and visibility periods.
Never use the Power Cutter when it is not completely assembled.
When starting the Power Cutter it must be well supported and securely held.
Storing the Power Cutter and fuel container.
Keep the Power Cutter away from children.
When working with the Power Cutter there is a danger of kickback and lock-in.
Switch off the Power Cutter immediately if you observe any changes in its - operating behavior.
Turn off the Power Cutter when taking a break or stopping work 14.
You'll also be interested in:
Examples of using Power
Show more
Power to provide everything you find outside
Have a remarkable power to heal old wounds
Power to make every inmate pay rent
Examples of using Cutter
Show more
Mounting of cutter blade or nylon cutting head
I organized a crazy cabal of secret cutter interns
Cutter should be fully seated into spindle
