Examples of 'power head' in a sentence
Meaning of "power head"
A power head usually refers to the main control unit or motor that powers a mechanical or electrical device
How to use "power head" in a sentence
Basic
Advanced
power head
Replace the power head on to the container.
Remove power cord from power head.
Place the power head on the master.
Another option is to remove the power head assembly.
Place power head assembly on top of drum.
Keep holding the power head down.
The power head has two speeds.
Never operate the power head while.
Lay power head assembly aside on a clean area.
Lift up on the power head and set it.
Power head speeds greatly affect abrasive use.
Always operate power head at full throttle.
In case of damage replace the complete power head.
Lift off the power head assembly.
These decals are considered as a part of the power head.
See also
Never operate power head without an attachment.
Installing an attachment to the power head.
The angle of power head in vertical surface.
Release the trigger to stop the power head.
Never operate the power head out of water.
Your power head must be used with care.
Transporting the power head by vehicle.
Depress the trigger to turn on the power head.
Lift the power head off the drum.
Push top of latch towards power head to lock.
Remove power head from collection.
Separate the attachment from the power head.
Do not connect to power head until assembly is complete.
To attach the handle module to the power head module.
Installing the power head shaft to the attachment.
Plug the extension cord into the power head.
Never oparate the power head without an attachment.
Loosen the knob on the coupler of the power head.
Lift the power head off the collection.
Clean all foreign material from the power head.
Place power head on a clean surface in.
The battery pack or power head is too hot.
Make sure power head is securely attached to dust drum.
Do this by trying to rotate the power head in either direction.
Remove power head and place in upside down position.
Attach the diffuser to the power head as shown in figure e.
Place power head on collection tank and secure latches.
Avoid operating the power head on a steep slope.
The power head is usually supported by punched angle iron.
Carrying the power head by hand.
Insert the lower handle onto the power head.
Chainsaw power head not included.
Unplug the unit and examine the power head.
Yes and a power head as well.
Never attach or adjust any attachment while power head is running.
