Examples of 'power the unit' in a sentence
Meaning of "power the unit"
power the unit: This phrase refers to supplying electricity or energy to a machine, device, or system in order to make it operational. It can also mean to provide the necessary resources or support to ensure the smooth functioning of a particular group or organization
How to use "power the unit" in a sentence
Basic
Advanced
power the unit
Power the unit and connect to network.
Plug in the adapter to power the unit.
Power the unit as described above.
There are two ways to power the unit.
It could power the unit for quite a while.
Remove the insulation insert to power the unit.
Power the unit in one of the ways as described above.
This cable is also used to power the unit.
Power the unit off and on and the code will disappear.
Plug in the wine cellar to power the unit on.
Do not power the unit down or pull the mains plug during upgrade.
This can make it difficult to power the unit.
Power the unit as described above with the supplied power adaptor or batteries.
But now looking at how to power the unit.
No power The unit is switched off.
See also
Installation simply requires a mains plug point to power the unit.
Remove the battery when you power the unit from the car battery.
Install one AAA battery in this compartment to power the unit.
Power the unit on by turning the VOLUME knob in the clockwise direction.
Press the Power button to power the unit on.
Power the unit ON by pushing the breaker switch to the active position.
AA batteries into this compartment to power the unit.
Also, do not power the unit on while its outer case is removed.
This connector is used in conjunction with the AC adapter to power the unit.
Depending on the power the unit is built of one, two or three modules.
DC IN connects to adapter and then to the mains to power the unit.
A fully charged battery can power the unit for about 2 hours.
Power Input, Insert the included power cable here to power the unit.
To power the unit on and off, press and release the power button 2.
Alternatively, use the adaptor supplied to power the unit.
Power the unit on, switch to TUNER ( RADIO ) mode by pressing SOURCE repeatedly.
Power Adapter Input, Insert the included power adapter here to power the unit.
Press On / Off to power the unit on.
Power Cable Input ( IEC ), Insert the included power cable here to power the unit.
STEP 2 - Power the unit up and the green LED will be ON alone.
When the PAL+ is off, press the wheel briefly to power the unit on.
Press the power button ( H ) to power the unit on and off.
Turn the unit back ” ON ” and the rechargeable battery will power the unit alone.
Power On / Off, Adjust this switch to power the unit on or off.
Battery Compartment, Holds one 1 AAA battery to power the unit.
When the Model 10 is off, press to power the unit on.
You'll also be interested in:
Examples of using Power
Show more
Power to provide everything you find outside
Have a remarkable power to heal old wounds
Power to make every inmate pay rent
Examples of using Unit
Show more
Then position the unit as shown below
Place unit in the fi nal installation location
Any institutional unit may hold valuables
