Examples of 'power to the unit' in a sentence
Meaning of "power to the unit"
power to the unit - the authority or control given to a specific department or group within an organization to make decisions and take action
How to use "power to the unit" in a sentence
Basic
Advanced
power to the unit
Disconnect the power to the unit before.
No power to the unit or the unit is shut off.
Reconnect the electrical power to the unit.
Off the power to the unit immediately.
Turn off all electrical power to the unit.
Supply power to the unit as follows.
Turn on circuit breakers to bring electrical power to the unit.
Illuminates when power to the unit is switched on.
Never use an extension cord to connect power to the unit.
Disconnect the power to the unit before servicing by.
Press this button for main power to the unit.
Disconnect power to the unit and open the door.
Turn on circuit breaker to bring electrical power to the unit.
Switches off the power to the unit completely.
No power to the unit or the unit can not start.
See also
Check input power to the unit.
Electric cutout switch that will interrupt all power to the unit.
Switch turns the power to the unit on and off.
Connect the line cord to this connector to provide power to the unit.
The power to the unit.
Displays when you first apply power to the unit.
Shut off power to the unit before replacing light bulbs.
Turn off the water and power to the unit.
Restore power to the unit and ensure that it is operating properly.
Diagnostics will be lost when the power to the unit is disconnected.
Disconnect power to the unit before attempting to perform these maintenance functions.
Some issues may simply be resolved by disconnecting the power to the unit.
Light will also flash when power to the unit has been interrupted.
Not shown are external connections required for delivering power to the unit.
Do not apply power to the unit until all of your connections are made.
The cord provided will carry the proper amount of electrical power to the unit.
Interrupts the supply power to the unit when the access cover is opened.
Used to connect the AC mains power to the unit.
Be sure to shut off all power to the unit while performing this inspection.
Air conditioner will not operate No power to the unit.
Turn clockwise to apply power to the unit and to set the desired listening level.
Attach the AC power adapter to provide power to the unit.
Connect power to the unit in accordance with the local and national electrical codes.
Cleaning Disconnect the power to the unit before cleaning.
Use the supplied cable to connect the AC mains power to the unit.
Electrical power to the unit must meet stringent requirements for the unit to operate.
The GREEN light indicates that power to the unit is on.
Before applying power to the unit for the first time, check for the following conditions.
Used this cable to connect the AC mains power to the unit.
To avoid electric shock, disconnect power to the unit under test and discharge all capacitors.
Use this cable to connect the AC main power to the unit.
Supply power to the unit through the DC plug or the USB micro-B port.
Power Used to switch the power to the unit on and off.
With power to the unit on, press the FILTER RESET button with a pointed tool.
E Power indicator Lights in green when the power to the unit is on.
You'll also be interested in:
Examples of using Power
Show more
Power to provide everything you find outside
Have a remarkable power to heal old wounds
Power to make every inmate pay rent
Examples of using Unit
Show more
Then position the unit as shown below
Place unit in the fi nal installation location
Any institutional unit may hold valuables
