Examples of 'power-down' in a sentence
Meaning of "power-down"
Power-down - (noun) refers to the process of shutting down or turning off a machine or device. It is commonly used in technical or operational contexts
How to use "power-down" in a sentence
Basic
Advanced
power-down
I need to be able to go into power-down mode.
Every time the power-down mode is terminated by.
The sequence has to be reversed for power-down.
I am gonna power-down flight controls to conserve energy.
The limiter is automatically activated to avoid premature power-down.
The power-down function can be disabled in the menu.
Ceiling fan with concentric stationary tube and power-down features.
Auto power-down mode saves energy when ports are unused.
At which point we must assume either a dead battery or a power-down of the phone.
It is also advisable to power-down or unplug all associated components while making.
Alternatively, pressing the burst number selection again can power-down the device.
The power-down function can be disabled via the menu system.
The first set of memory banks may then be placed into a power-down state.
Disconnect the power-down box cable from each control box.
The values below have been measured at the time when the power-down level is reached,.
See also
The power-down error compensation circuit comprises a transistor voltage stabilizing circuit.
Both embodiments provide a possibility of data storing which will be kept during a power-down event.
Power-down the unit and remove the battery to expose the serial number sticker.
Always follow proper power-up and power-down procedures when cycling power across the network.
With power-down lever function to meet the special needs of users and fire safety requirements.
They are the crew that will safe the orbiter and help with the power-down.
It is not necessary to power-down the Gage when switching probes.
CS has been brought high to enter a power-down mode.
E To terminate the power-down mode press one of the three buttons.
Setting of the LED floor lighting brightness for night power-down mode.
The compensation circuit is used to prevent a power-down error of the RL multivibration circuit.
I am gonna power-down flight controls to conserve energy and then go defend the Cage door.
Insert it into the same port that you disconnected the power-down box from in Step 2.
The different power-down modes supported are,.
The inner loop uses a predetermined SNR threshold or setpoint to make power-up and power-down decisions.
Power-down does not affect them.
Local authorities are standing by for power-down in New York.
Power-down mode with the set time.
The clock is in night power-down mode.
A full power-down for your entire data centre ;.
Putting the device in power-down mode.
Power-down can be continued.
Places the device into power-down mode.
To prevent damage, power-down must be done in the reverse order as power-up.
Output status at power-up the same as at last power-down.
The automatic power-down feature of TI-Nspire is disabled during transfers.
As was normal at the time, memory was not preserved on power-down.
Accordingly, numerous power-up and power-down procedures can be implemented.
Shut the system down in a controlled manner, ready for power-down.
It is always a good idea to power-down ( switch off ) all equipment prior to connecting cables.
A similar process is followed at time t=3 to issue a power-down command.
To ensure proper power-down sequence, wait a minimum of 20 seconds before installing new battery.
We are on emergency power-down.
To ensure a proper power-down sequence, wait a minimum of 20 seconds before installing new batteries.
However, not everyone will be eager to join in the power-down adventure.
