Examples of 'pph' in a sentence
Meaning of "pph"
PPH can stand for 'Private Pilot Helicopter' or 'Post-Partum Hemorrhage' depending on the context
Show more definitions
- Alternative form of PP&H
- Initialism of permanent private hall.
How to use "pph" in a sentence
Basic
Advanced
pph
Pph orias production wicker products.
Thursday i had a right heart cather that showed i do not have pph.
Two pph of stearyl stearamide was added for dimensional stability.
Synthesis by direct transformation of the alcohol using PPh 3.
All pph values are relative to PS resin weight.
Amorphous silica was varied between zero and 5 pph.
Isobutane at 9 pph was injected into the mixing zone.
Isobutane is injected into the mixing zone at a uniform rate of 7 pph.
The pph values in Table 1 are relative to PS resin weight.
This example differs from Example 4 basically by the reaction temperature and the pph.
The main uses for DOWANOL PPh Glycol Ether are,.
He 's filed a suit against pph.
The addition of 3 PPh 3 results in a better yield.
Apparently, there is some kind of PPh seepage?
To 1.0 pph of a third component selected from alkoxylated alkylphenols or derivatives thereof.
See also
It is typically employed in the range of about 5 to about 30 pph of resin.
To the bowl was further added 100 pph of the desired interpolymer as prepared above.
For subsequent hours of flight the company used a consumption figure of 210 pph.
This concentration is expressed in polymer literature as 1 pph ( parts per hundred of the monomer ).
Typically, the plasticizing agent is present in the adhesive in amounts from about 5 to 25 pph.
The blowing agent comprised 4.5 pph carbon dioxide based on the weight of the polystyrene.
He 's filed a suit against pph And dr.
GMS was employed at 1.8 pph for control of foam dimensional stability.
Glycerol monostearate ( GMS ) was used as the stability control agent at 2 pph level.
Total blowing agent is in pph relative to PS resin weight . Table 3.
Th-There was an explosion at the plant . Apparently, there is some kind of PPh seepage?
Measured as pph based on a total extrusion rate of 60 kg / hour.
Example 9 demonstrates the successful hydroformylation of EPDM utilizing a 10 pph level of dicarbonyl acetylacetonate Rhodium ( I ).
The runs used 1.5 pph of black concentrate for a black foam.
The reaction mixture was cooled to 95°C and the butyl CARBITOL and DOWANOL PPh were added.
An additional portion of 0.36 pph photoinitiator was then added to the syrup.
It is typically employed in the range of 5 to 30 pph of resin.
The blowing agent used was 2 pph carbon dioxide and 1.6 pph of water.
Preferably, the plasticizing agent is present in amounts from about 20 to 80 pph.
From 0.1 to 1.0 pph of the aromatic polycarbonate of a flame retardant combination comprising a flame retardant salt.
The laminate layers contained 200 pph filler loads.
A loading of 3 pph F100D expandable polymeric microspheres was used.
When leaking started, the fuel flow decreased to about 111 pph.
Apparently, there is some kind of PPh seepage? - The water 's contaminated?
Polymerization requires a hydroxyl source, such phenol present in an amounts of about 0.1-6 pph.
Column 6 is a solvent treated only with 2 pph each of AI-1 and water.
Determining the value PpH 2 O limit defined in formula [ 1 ] under the reaction conditions ;.
Residual cobalt in the macromonomer units may range for 1 to 100 pph by weight.
Pph of the blowing agent CO2 and 4.5 pph of the control agent ethanol are injected.
An elastomeric composition according to one of the preceding claims, wherein said pph ( ENR ) is 50.
TABLE 1 values of ppH 2 O limit ( in bars ) as a function of the temperature.
A crosslinker X in an amount of at least 1 and of at most 90 pph binder K ; and.
The binder K1 comprises a crosslinker X1 in an amount of at least 1 and at most 90 pph binder.
