Examples of 'pre-preg' in a sentence
Meaning of "pre-preg"
pre-preg: Short for 'pre-impregnated', referring to composite materials in which a reinforcing fiber is pre-impregnated with a resin matrix
Show more definitions
- Alternative form of prepreg
How to use "pre-preg" in a sentence
Basic
Advanced
pre-preg
Noodles have also been constructed of pre-preg fabric.
The pre-preg material is typically supplied in sheets or plies.
The impregnated paper obtained is usually called pre-preg.
The pre-preg resin material may be a thermosetting epoxy resins.
Noodles have been constructed from unidirectional pre-preg tape.
Pre-preg is again fed off the roll under tension.
These are the typical properties of the pre-preg system.
The pre-preg is thus supported without slip during stabilization treatment.
Made from the best quality pre-preg carbon fiber.
A third pre-preg fabric strip covers the core third surface.
This type of fabric also may be referred to as a pre-preg fabric.
A second pre-preg fabric strip covers the core second surface.
Method and apparatus for contouring composite pre-preg articles.
A first pre-preg fabric strip covers the core first surface.
This can further accelerate the cure of the pre-preg resin.
See also
Fabrication techniques using pre-preg may have disadvantages in some applications.
In one embodiment the first resin layer may be a pre-preg layer.
As regards the specification of the pre-preg materials, the following considerations apply.
The typical manufacturing methods are vacuum resin infused or pre-preg methods.
The pre-preg has proven to be sufficiently radiation-transparent for polymerization to be thoroughly homogeneous.
This contrasts with the known use of smaller cured pre-preg lengths.
As can be seen, this way a woven pre-preg material can be produced during weaving.
As an alternative, the wingtips can be made of composite carbon fiber pre-preg materials.
The pre-preg and infused structural resin materials are cured at least partially simultaneously.
Such a weld is realized by heating the pre-preg stack locally and for a short time.
An eighth pre-preg fabric strip covers the fifth strip and the second strip.
The controller is further yet configured to control the application head in transferring the pre-preg.
The sheet may comprise a pre-preg material where the substance is matrix resin.
The platen temperature can conveniently be adjusted to suit the particular pre-preg material utilized.
A fifth strip of pre-preg fabric covers the second strip on the core second surface.
In these cases the heating softens the resin and makes the pre-preg workable.
The behaviour of thermosetting pre-preg materials is highly viscoelastic at the typical lay-up temperatures used.
Machines of this type can also cause difficulties in tacking the pre-preg onto the core.
A fourth pre-preg fabric strip covers the first strip on the core first surface.
These covers have been produced from pre-preg Carbon Fibre which has been autoclaved.
A ninth pre-preg fabric strip covers the sixth strip and the third strip.
A carbon fibre substrate was produced using a pre-preg supplied by Amber Composites / Tencate Advanced Composites.
B-Stage pre-preg is always stored in cooled areas since heat accelerates complete polymerization.
Technical textiles composites pre-preg.
The uni-directional pre-preg layers may be aligned in different directions to suit predicted stress conditions.
Hence in this embodiment, only one section of pre-preg material is stretched.
This provides a pre-preg with excellent drapability, useful for producing a wide variety of structural shapes.
A method of automatically pre-forming a sheet of pre-preg material, the method comprising,.
Typically the pre-preg resin, infusion resin and surface resin materials have a different viscosity.
This type of two-component resin systems also can be referred to as a so-called pre-preg system ;.
The second insert pre-preg sheet may be completely spaced from the first insert pre-preg sheet.
Method according to claim 12 wherein the preforms are obtained from a carbon fibre pre-preg material.
JIT pre-preg is suitable for small aircraft where stress levels are not high.
The whole process starts with Pre-Preg Carbon Fiber that is stored at Low Temperature.
Pre-preg is fed into the rollers and picked up by the pre-heated core.
