Examples of 'press the lock button' in a sentence
Meaning of "press the lock button"
This phrase instructs or advises someone to push or activate the lock button, typically referring to a specific button or control mechanism that can lock or secure something such as a device, door, or object
How to use "press the lock button" in a sentence
Basic
Advanced
press the lock button
Press the lock button to enter locked mode.
If the shaft moves while attempting to loosen the blade stud press the lock button.
Press the lock button to secure into place.
To lock the control panel press the Lock button.
Never press the lock button while the device is operating.
To set the type of operation required, press the lock button on the selector.
Press the lock button and then the trigger to start.
To remove the tube, press the lock button and pull the.
Press the lock button again until the lock is deactivated.
To turn the inverter off, momentarily press the Lock button.
Never press the lock button when the device is switched on.
To return the keypad to " active " condition, press the lock button.
Press the lock button for several seconds to unlock the controls.
Then, within 5 seconds press the lock button for a second or so.
Press the lock button and begin turning the rear handle.
See also
To deactivate the lock, press the lock button for approximately 6 seconds.
Press the lock button more in order to stop the fog emission.
For continuous operation, press the lock button (E) while squeezing the trigger.
Press the lock button located on the upper right side of your phone.
Arm the system, then press 6, or press the Lock button on a keychain touchpad after arming.
Press the lock button and turn wrench until lock button en gages.
And hold it down . - Press the lock button.
Never press the lock button when the electric drill is operating.
Loosen the chuck ( A ) using the wrench ( H ) and simultaneously press the lock button G.
Press the lock button and rotate the switch handle to left or right fully.
Carefully press the lock button 1 Please note.
Press the lock button and adjust the flash head to set the bounce angle.
When recording is completed, press the Lock button again to make program changes possible again.
Press the Lock button to arm the system.
To get permanent steam, press the lock button ( 15 * ) and slide it backwards until it locks.
Press the Lock button twice to enter the playback mode.
Press the Lock button to prevent unwanted program changes during recording.
Press the Lock button once to arm the system and again to bypass open sensors.
Press the lock button in the selector lever handle and put the lever in position N.
Press the Lock button three times.
Press the Lock Button on the transmitter.
Press the lock button for approximately 6 seconds.
Press the lock button on the three-position height.
Never press the lock button while the spindle is still rotating!
Press the lock button on the battery buckle and pull Figure 5.
Press the Lock button to arm the system directly to Level 3 with no Exit delay.
Press the Lock button ( ) on the side of the monitor to unlock the touch buttons.
Press the lock button ( N ) to secure contact trip.
Press the lock button and pull the door up at the same time fig . 6, page 4.
Press the lock button ( 4 ) and release the control lever, and then release the.
Press the Lock button ( ) again to re-enable touch buttons.
You'll also be interested in:
Examples of using Press
Show more
Each press changes the display indication
Gordon has the press on his side
Press BACk to return to the previous menu
Examples of using Lock
Show more
Get this lock off the gate
Lock bowl onto base by turning clockwise
Document digital lock concerns and complaints
Examples of using Button
Show more
Humid steam button depending on the model
You are in a danger of loosing this button here
Press the button to access this function
