Examples of 'presser bar' in a sentence
Meaning of "presser bar"
Presser bar: The presser bar is a component of a sewing machine that holds the fabric in place while stitching. It exerts pressure to keep the fabric flat and prevent it from shifting during sewing
How to use "presser bar" in a sentence
Basic
Advanced
presser bar
Raise the presser bar lifter.
Attach the presser foot w to the presser bar e.
Lower the presser bar and attach the foot.
Lift up the presser foot and presser bar lifter.
Lower the presser bar and sew on the button.
Cut threads with thread cutter behind presser bar.
The presser bar may have two rows of needles.
Lift up the presser foot using the presser bar lifter.
Lower the presser bar to lock the foot into place.
The same gearbox drives another bell crank which operates a presser bar.
Raise the presser bar and turn the setscrew counterclockwise to remove it.
Match the hole in the foot holder with the threaded hole in the presser bar.
Press down the presser bar lifter and open the presser foot.
Match the hole in the foot holder w with the threaded hole in the presser bar e.
The presser bar stroke is adjusted to move the bar close to the comb.
See also
When attaching, place shank on presser bar.
Raise the presser bar and turn the setscrew counterclockwise to remove the foot holder.
Figure 8 is an enlarged side view of the presser bar needles.
When the presser bar has moved into the space, the space is closed systematically.
As the result, the pressing of the presser bar over the knitted fabric is released.
To attach, match the hole in the shank w with the hole in the presser bar e.
The pressure regulating thumb screw e and raising the presser bar lifter lever 0 without applying pressure.
Always turn off the power and unplug the machine before opening / closing the presser bar.
Then, attach the buttonhole foot to the presser bar and sew the buttonhole.
Lower the presser bar to attach the foot . q Groove w Pin.
Remove the presser foot holder by unscrewing ( counterclockwise ) the presser bar attaching screw.
The presser bar and shark unit are raised in unison using the jacks 102.
Place the thread take-up lever at the lowest position, and lower the presser bar lifter.
By then, the presser bar 6 has been retracted from the toothed opening A between the sinkers 2.
Bring lever 1 down to open presser bar 2.
Raise the presser bar ( A ) with the presser foot lifter.
Bring lever 1 down to put presser bar 2 back.
You'll also be interested in:
Examples of using Presser
Show more
The correct presser foot is not being used
Do not forget to lower your presser foot
The presser foot must be changed according to
Examples of using Bar
Show more
I am setting the bar low so we are not disappointed
Bar gang out of town remains safe
I stopped at the bar to drink some beers
