Examples of 'pressure feed' in a sentence
Meaning of "pressure feed"
Pressure feed refers to a feeding system where a substance or material is forced through a channel or pipe using pressure, typically for processes such as spraying or pumping
How to use "pressure feed" in a sentence
Basic
Advanced
pressure feed
Electrically insulated pressure feed paint reservoir.
Pressure feed spray gun needle and nozzle selection guide.
Thin fluid or change to pressure feed system.
A pressure feed tank delivers the wet top coat to the gun.
Convert the gun to pressure feed.
If using in remote pressure feed mode decrease fluid pressure at paint tank.
Thin material or change to pressure feed.
The high pressure feed was then introduced into an autoclave fitted with a stirrer.
Thin material or convert to remote pressure feed mode.
Pressure feed is generally used for heavy bodied latex paints or for larger size projects.
Fluid pressure too low pressure feed only.
Pressure Feed This meter indicates the pressure in the feed pipe.
Restart the pressure feed.
Schematic flow diagram of a liquid propellant rocket engine with a gas pressure feed system.
This air pressure feed is also used for other purposes, as will be described below.
See also
Internal mix caps must be used with pressure feed operation.
Further, the coating pressure feed roller is operable adaptively for a surface locally curved.
These caps can be used with either siphon or pressure feed.
Before using a pressure feed system, the spray gun must be converted to a pressure fed gun.
The pilot chambers are connected via constrictions to the pressure feed port.
Its pressure is raised by a low pressure feed pump 2 which delivers fuel at a pressure Pb.
An internal volume of the stub may be coupled to the pressure feed unit.
Pressure Feed only, Adjust fluid pressure to achieve desired fluid flow rate.
The other type of the spray guns is a pressure feed spray gun.
High pressure feed air 1 is fed into the base of a high pressure column 2.
The spray gun is now ready to be connected to any pressure feed tank with a.
The medium pressure feed fluid is provided to the energy recovery portion 120.
This results in reduced flow of the pump under intermediate pressure feed conditions.
Feed repressurization ( RP ) with elevated pressure feed gas, possibly in combination with product gas.
In an embodiment, the casing is detachably mountable on the pressure feed unit.
Step 1 Raising pressure feed with counter-current top pressurization with product tank oxygen ;.
These advancements enable the use of lower pressure feed for the separation.
Lower pressure feed air 22 may also be introduced into column 4.
Alternatively, it may be a pressure feed spray gun.
In an alternative embodiment, the casing is integrally formed with the pressure feed unit.
At ends of the rectangular área, the coating pressure feed roller brush 10 temporarily stops.
Fig . 1 is a perspective view conceptually showing a coating device including a coating pressure feed roller.
Feed repressurization ( RP ) with elevated pressure feed gas, or combinations with ambient pressure feed gas.
Alternatively, the spray gun may be of the suction feed type or pressure feed type.
In Fig . 1, the coating pressure feed roller is a part of a roller brush assembly 10.
Internal mix must be used with pressure feed set-up.
In the figure, reference numeral 90 is a roller flattening device, and 91 is a coating pressure feed roller.
Further, a pressing force applied to the coating pressure feed roller is uniform.
Saltwater passes through an inlet pipe 100 into a centrifugal pump 101 which is a high pressure feed pump.
In an embodiment, the fluid cartridge itself comprises the pressure feed unit as a part thereof.
Alternatively, different fluid cartridges may be served by one and the same pressure feed mechanism.
At the endpart of the rectangular área, the coating pressure feed roller brush stops.
Fig . 22 is a diagram for explaining a coating operation performed by the coating pressure feed roller.
That would require only one high pressure feed pipe 319.
These edges 89, 104 are prone to chipping upon repeated impact under pressure feed conditions.
You'll also be interested in:
Examples of using Feed
Show more
You would not feed this to a pig
I feed those birds bread every day
He will be able to feed himself from now on
Examples of using Pressure
Show more
No effect on blood pressure or pulse rate was observed
Pressure transmission pipe in the combustion chamber
We were under a lot of pressure because of the family
