Examples of 'pressure losses' in a sentence
Meaning of "pressure losses"
Pressure losses refer to the reduction in fluid pressure that occurs as a result of fluid flow through a system or device. It is often caused by friction, resistance, or obstruction within the flow path and can impact the efficiency, performance, and functionality of the system. Pressure losses are commonly encountered in fluid dynamics and engineering applications
How to use "pressure losses" in a sentence
Basic
Advanced
pressure losses
Provides total pressure losses in the system.
Pressure losses and the level of noise.
Mechanism to reduce pressure losses in angled conduits.
Pressure losses occur as the fluid is circulated.
Available in different diameter to reduce pressure losses.
Thereby pressure losses due to turbulence are reduced.
No deviation of flow and minimal pressure losses.
Pressure losses are calculated with the controlling calculation.
With such a configuration pressure losses can be minimized.
Pressure losses of valves and fittings in the delivery.
Types of elements and corresponding static pressure losses.
No change in pressure losses with component entry flow.
Low roughness that determines minimum pressure losses.
Low pressure losses in the plant.
Designed for minimum pressure losses.
See also
It reduces pressure losses and facilitates a possible flow.
This is done by minimizing the pressure losses.
These pressure losses are due to catalyst and filters.
Liquid can not without substantial pressure losses.
Reduced pressure losses of the turbine.
Contamination of the filters causes high pressure losses.
Are pressure losses of natural gas in the transportation system compensated.
Bypass dampers reduce pressure losses at heat recovery unit.
Such a configuration may allow for minimizing of pressure losses.
This keeps the pressure losses at high capacity low.
This would result in large swirls and associated pressure losses.
Minimal pressure losses.
Pressure losses and sound levels are also calculated within MagiCAD.
Concept of pressure losses.
The pressure losses in this case are substantially only very slight.
A further reduction of the flow pressure losses is effected by way of this.
Pressure losses and cooling flow requirements must be minimized to improve performance.
Reduced pressure losses.
This results in deterioration of the transfer of heat and in extra pressure losses.
No pressure losses.
The design may be chosen to minimise pressure losses or flow resistance.
There are pressure losses in the bifurcation arrangements and any silencers provided.
These flowrates would cause significant pressure losses in the feed circuits.
Pressure losses are therefore significantly lower than those of a heat meter with turbine.
The construction of the ampule reduces pressure losses and lowers turbulence.
The pressure losses upstream from the metering unit constitute an important aspect.
The tool also calculates extra pressure losses caused by the solid particles.
Insure constant temperature on the hoses to reduce as much as possible the pressure losses.
This keeps low pressure losses within said high pressure channel.
Instructions for calculation and measurement of the pressure losses in flue gas ducts.
The indicated pressure losses are valid for water and air at maximum flow rate.
Certain devices make it possible to reduce the disparities or balance the pressure losses.
This short flow path minimizes pressure losses between the turbine stages.
The configuration of the scoop and the passage can reduce pressure losses.
This maximum clear crosssection reduces pressure losses and minimises flow generated noise.
You'll also be interested in:
Examples of using Pressure
Show more
No effect on blood pressure or pulse rate was observed
Pressure transmission pipe in the combustion chamber
We were under a lot of pressure because of the family
Examples of using Losses
Show more
Gains and losses recognized in comprehensive income
Less profit included in contract losses claim
Losses incurred as a result of temporary psychological injuries
