Examples of 'pressure spring' in a sentence
Meaning of "pressure spring"
A pressure spring, also known as a compression spring, is a mechanical device or component that is designed to store and release energy. It works by absorbing and resisting force or pressure when it is compressed and then releasing that stored energy when the pressure is removed. Pressure springs are commonly used in various applications, including mechanical systems, automotive parts, and industrial machinery
How to use "pressure spring" in a sentence
Basic
Advanced
pressure spring
There is a pressure spring in the spring bonnet.
Damaged magazine feed pressure spring.
The gas pressure spring shall be pressed in.
Each reel is equipped with a down pressure spring.
Gas pressure spring supports the tilting mechanism.
Lift the flap so that the gas pressure spring holds it open.
Secure the pressure spring in position before cleaning.
Between it and the peripheral shoulder of the traction casing there is a pressure spring.
An example of such a pressure spring is a multimodal corrugated disc.
In this way a combination of a hydraulic shock absorber and a pressure spring can be used.
Move down pressure spring one hole towards spring.
The inflation ring is held in a raised position by a pressure spring surrounding the sliding shaft.
A pressure spring presses the rod into a receiving part.
The middle section and if necessary the pressure spring can be cleaned in a dishwasher.
A pressure spring is arranged for urging the flap to a closing position.
See also
The design with the tension or pressure spring is a valuable alternative to the leaf spring.
Between the lifting drive plunger and the mounting hole is provided with a pressure spring.
He was like a high pressure spring which had suddenly rebounded.
The first knuckle bearing is provided with a first pressure spring at the upper part.
Move down pressure spring one hole away from spring.
Between the first knuckle bearing and the second knuckle bearing a second pressure spring is provided.
The function of this pressure spring will be explained hereinbelow.
When it opens, the anchor pretensions the pressure spring.
Remove bolt and pressure spring from the power chuck.
Rocking of the bridge is accompanied by crushing of the contact pressure spring 24.
Gas pressure spring.
Turn the adjusting screw anti-clockwise until the pressure spring is unstressed.
The pressure spring assumes the rapid projection of the actuator pin.
According to a first embodiment, the contact pressure spring bears on the movable cage.
Replace the pressure spring every six months according to the following requirements.
Alternatively, however, the lifting spring can also be realized by a gas pressure spring.
The spring is situated as a pressure spring between the pipe socket and the housing.
To do this, the seal can have a separately constructed inherent for example pressure spring.
There exists a pressure spring inserted between these oscillating elements on the same shaft.
The leaf spring 6 functions therefore as a switch delay spring and as a contact pressure spring.
This pressure spring can correspondingly be designated a readjustment spring for the service brake.
In a preferred further development, the variable mounting part of the material supply has a pressure spring.
Contact pressure spring having two ends ;.
Anchoring system, Quick release pins and pressure spring plunger.
If the pressure spring is projected, it can cause injuries.
Clutch spring member 43 may be a pressure spring.
Ensure that the pressure spring is not tensioned!
The bias of the blade pair is produced by the pressure spring 10.
The prestressing of a pressure spring 54 is directed against its vertical movement.
The print head 11 is urged toward the paper transport path P by a head pressure spring 14.
The pressure spring is positioned against a lock-nut, screwed on to the traction mandrel.
This is advantageous, but not mandatory, and the pressure spring 22 can also be omitted.
The pressure spring can rest on the fixing projection for example, especially rest thereon circumferentially.
Lower reels to the ground and remove down pressure spring pins V, Figure 3F.
A pressure spring 301 is arranged between the piston and an end wall.
You'll also be interested in:
Examples of using Pressure
Show more
No effect on blood pressure or pulse rate was observed
Pressure transmission pipe in the combustion chamber
We were under a lot of pressure because of the family
Examples of using Spring
Show more
I want to spend spring break with you
Spring onions and all kinds of vegetables
And a new trigger spring in the pistol
