Examples of 'previous layer' in a sentence
Meaning of "previous layer"
This phrase refers to the layer or level that came before or was underneath the current layer or level. It is commonly used in various contexts, such as technology, geology, or even in describing the process of building or assembling something with multiple layers
How to use "previous layer" in a sentence
Basic
Advanced
previous layer
Recoatable without sanding of the previous layer.
Cancels the previous layer selection.
Each of them is shrunken from the previous layer.
Lower to previous layer.
Each layer of paint covers up the previous layer.
Check the previous layer is completely dry before applying the next.
Wash away the previous layer.
The material solidifies within seconds and binds with the previous layer.
Switch to previous layer.
Each channel describes different aspects of the previous layer.
Switched to previous layer.
It matches with the psychological approach of the previous layer.
The tapes may thus be consolidated to the previous layer before the profile is sectioned.
The following layers entirely cover the surface of the previous layer.
Ensure that the previous layer has dried properly before applying the next layer.
See also
These should be smaller than the previous layer of cream balloons.
The nozzle is preferably displaced in the opposite direction to that of the previous layer.
Always ensure that the previous layer has cured perfectly before applying a new coating.
The third layer element is connected fully to the previous layer elements.
Always ensure that the previous layer has hardened perfectly before applying a new coating.
The next layer of paint must be painted after the previous layer dried.
Wait until the previous layer has sufficiently cooled down before pouring on the next layer.
Each successive layer uses the output from the previous layer as input.
Always ensure that the previous layer has hardened correctly before applying the next layer.
Hidden layers extract important and more abstract features from the features of the previous layer.
Lithography / etching cycle of the previous layer is performed to define the mechanical resonators.
So, in a fully connected layer, the receptive field is the entire previous layer.
Before jetting the following layer, the previous layer is immobilized by a curing step.
Thus, each radial layer of punchings must be a slightly different size than the previous layer.
It is best to recoat the previous layer with Durofloor within 3 days.
This allows the design to nest, accommodating the thickness of the previous layer of acrylic.
Successive layers of such coated, uni-directional filaments are rotated with respect to the previous layer.
Otherwise, set the new current layer to the previous layer and go back to 5.
Successive layers of such uni-directional fibers can be rotated with respect to the previous layer.
The polymer is advantageously suitable for adhering well to the previous layer ( the heating layer 3 ).
Successive layers of such coated, uni-directional fibers are rotated with respect to the previous layer.
The space located between the nozzle orifice 52 and the previous layer 19 is then entirely empty.
Several layers could be applied one after the other, after gellification of the previous layer.
Accordingly, when the cable receives a load, the tension in the previous layer is lower.
Further, each foil strip 50 is approximately midway between two foil strips 30 of the previous layer.
If settings are restored, a message is displayed: “Restored previous layer states.
Each layer is placed at a 90 degree angle to the previous layer.
The command prompt displays the message “Restored previous layer status.”.
Make sure that each layer of tape covers 50 % of the previous layer.
Each layer should be at least 10 degrees of proof higher than the previous layer.
You'll also be interested in:
Examples of using Previous
Show more
Highlight the previous item in the menu
Previous station in the selected frequency range
Date of most recent previous report if any
Examples of using Layer
Show more
A layer is displayed independently from other layers
The usage of second layer additional purchase
Every layer seems to beat to a different tune
