Examples of 'primer bulb' in a sentence
Meaning of "primer bulb"
primer bulb: a small pump component used to prime a fuel system in engines
How to use "primer bulb" in a sentence
Basic
Advanced
primer bulb
Prime the primer bulb until no more.
Fuel should be visible in the primer bulb.
Push primer bulb two or three times.
Incomplete forced fuel feeling by primer bulb.
Push the primer bulb up to eight times.
Some amount of fuel should be visible in the primer bulb.
The primer bulb was not pressed enough.
Slowly push the primer bulb seven times.
The primer bulb need not be completely filled.
Drain a fuel tank and push the primer bulb until it.
Push the primer bulb up to ten times.
Feed fuel to the carburetor by squeezing the primer bulb until firm.
Push primer bulb until bulb is full of fuel.
Prime the engine by depressing the carburetor primer bulb four or five times.
Push the primer bulb approximately eight times.
See also
Thus fuel can flow easily through the primer bulb in only one direction.
Push the primer bulb approximately ten times.
Then check that the diesel is flowing correctly by squeezing the manual primer bulb.
Squeeze primer bulb until it becomes.
Push and fully release primer bulb 7 times.
Primer bulb for easy starting.
Continuously push the primer bulb until fuel comes in the bulb.
A primer bulb is also present somewhere on the hose.
Once this has been done, you will see some fuel in the primer bulb.
Push primer bulb until fuel is visible in the bulb.
Fully press and release primer bulb slowly 5 to 7 times.
Squeeze primer bulb several times to purge fuel from carburettor.
Fully press and release the primer bulb slowly 10.
Prime the primer bulb until no more fuel is passing through.
The pump 42 may be constructed similar to a small engine primer bulb.
Push primer bulb until bulb until fuel is visible in the bulb.
After the 7th press, fuel should be visible in the primer bulb.
Squeeze primer bulb until it becomes stiff to feed fuel to vapor separator.
Some amount of fuel should be visible in the primer bulb and fuel lines Fig . 7.
Hold the primer bulb in for one full second each time you press it.
NOTE, After the 7th press, the fuel should be visible in the primer bulb.
Repeatedly pressing the primer bulb will not flood the engine with fuel.
Primer Bulb - Injects fuel mixture into the carburetor for ease of starting the engine.
Locate the primer bulb SeeFigure 5.
Primer Bulb - Prepares a cold engine for starting.
Press the primer bulb 3 times.
Primer bulb was not pressed enough Press primer bulb fully and slowly 10 times.
Depress the primer bulb 10 times.
If primer bulb fills, engine may be flooded see next item.
Some amount of fuel should be visible in the primer bulb Fig . 19.
Pump the primer bulb until fuel can be seen flowing through the fuel return.
Fill the carburetor by pushing primer bulb a couple of times A, Fig . 16.
Press the primer bulb until fuel can be seen flowing in the transparent return tube.
PRIME - Press the primer bulb at least 7 times, so.
Primer bulb 10 times, or until fuel is visible.
You'll also be interested in:
Examples of using Bulb
Show more
Unscrew the bulb cover by turning anticlockwise
They also removed his light bulb
Then turn light bulb counterclockwise to remove
Examples of using Primer
Show more
The primer includes the following modules
It was mostly gray primer and fender fill
A primer is not necessary for small repairs
