Examples of 'print density' in a sentence
Meaning of "print density"
print density: Print density refers to the darkness or intensity of the print on a page. It is often used in printing technology, photography, and graphic design to describe the concentration of ink or toner on a printed material
How to use "print density" in a sentence
Basic
Advanced
print density
The print density is set too low.
A paper substrate having enhanced print density.
This causes a reduction in print density and some loss in print resolution.
Recording sheet with improved print density.
Display the print density menu from the operation panel and select a lighter density setting.
It is therefore difficult to always obtain a uniform print density.
Set the print density from the operation panel to a higher level than the current setting.
The dye content in the ink must be increased to enhance the print density.
Print density See the tabel below.
An increased or higher porosity is usually associated with lower print density and print gloss.
Print Density is set to low.
Use the arrow keys to scroll to the Print Density screen.
Refer to Adjusting Print Density in the Media section of this manual.
The new high-performance models are said to combine print density and speed.
Example 8 had equivalent print density at a lower pigment loading.
See also
Thus, a print density difference among the respective print modes can be further eliminated.
The above values are calculated under print density 2 with recommended paper at normal.
Print Density Refer to the following table 2.
As has already been mentioned above, the print density is determined in the thermal print.
Print density too low or irregular?
Therefore, the latitude between scumming and poor print density is considerably narrowed.
Try to increase the Print Density setting by a single point, then check results.
The properties selected for evaluation were drying time, print density and edge acuity.
If necessary, increase the print density or use a paper that has good color development.
Surprisingly, the I-Beam structure appears to give a boost to inkjet print density and color gamut.
This result causes poor print density and an overall " muddy " appearance to colored images.
Thus, it is difficult, in some cases, to obtain high print density.
Try to decrease the Print Density setting by a single point, then check results.
The printed product contained a glossy ink film having a print density of 1.02.
Solution, Be sure the Print Density setting is not set too high.
A print density is controlled by changing a reference table shown in Fig . 7.
Unless there is a print head offset, uneven print density can potentially occur.
A uniform print density can, therefore, not be achieved.
Why is the print density not correct?
Print density is measured using a reflectance densitometer X-Rite, Macbeth.
Adjustment of the print density ( image anamorphosis ).
The print density is commonly indicated in optical density units ( ODUs ).
The optical print density is measured using a Gretag-Macbeth Spektrolino ™.
If print density is set to level 2 ( Standard ) or over, print speed may decrease.
AE for Cyan at 100 % print density after two weeks of fluorescent light exposure, Compound.
The print density for each print is measured using a densitometer ( Gretag D19C ).
AE for Magenta at 100 % print density after two weeks of fluorescent light exposure, Compound AE.
Background and print density Measured with a Macbeth densitometer ( RD-918 manufactured by Macbeth ).
You'll also be interested in:
Examples of using Print
Show more
Updating print drivers has never been easier
You did not read the fine print
I can print out a copy for you
Examples of using Density
Show more
Reduces bulk density and increases porosity
Density and volume under changes in temperature
Measure the particle density of the thermosphere
