Examples of 'printheads' in a sentence
Meaning of "printheads"
printheads (noun) - Printheads are components of printers or plotters that apply ink or toner onto paper to create text, images, or graphics. They are essential for the device's printing function and can vary in type and technology
Show more definitions
- plural of printhead
How to use "printheads" in a sentence
Basic
Advanced
printheads
Check the printheads and ink cartridges.
I do not know where to insert the printheads.
Reinstall the printheads and try to print.
Printheads are replaced at the end of printhead life.
One or more of the printheads needs attention.
Handling ink cartridges and printheads.
Temperature of the printheads is within operating range.
Press the button to begin cleaning the printheads.
Insert the printheads one by one.
Try reinstalling the indicated printheads.
One or more of the printheads are faulty or need attention.
Remove and discard all orange setup printheads.
One or more of the printheads are missing.
When you install one or more new printheads.
Commercial printheads can have tens to thousands of nozzles.
See also
The inner cover of the printheads is not closed.
A problem has occurred with one or more printheads.
One or more of the printheads is missing.
The product will proceed to align the printheads.
Commanding the printheads via the command system.
Load substrate and align printheads.
The printheads or the cartridges are missing or not installed correctly.
Use more than two printheads in one print.
Remove the tape from the new printheads.
The printheads are still functional.
Some of the ink nozzles on the printheads are clogged.
Printheads for such high throughput devices tend to be expensive.
Remove all of the setup printheads.
In other examples the printheads may be continuous drop printheads.
The set offset has an effect on both printheads.
The printheads then apply the ink to an imaging media.
The value is set for both printheads together.
Insert the printheads with the blue handle towards you.
The printhead temperature is displayed for both printheads.
Wide areas across one or more printheads are not printing.
These processes help maintain reliability of the printheads.
Check that the printheads and ink cartridges are properly installed.
If needed the nozzle plates of the printheads are cleaned.
Lower all of the printheads vertically into their correct positions.
Device and method for cleaning inkjet printheads.
Positioning all the printheads with respect to the original image.
I know a lot of you are printheads.
In some configurations the printheads assemblies are movable along three axes.
The heater resistance value can be set for both printheads.
Printing system with fixed printheads and movable vacuum platen.
The setting mode is only to use for adjusting the printheads.
The printer aligns the printheads and prints two alignment pages.
This can cause lack of uniformity problems between different printheads.
Inkjet printheads operate best at a slightly negative nozzle pressure or back pressure.
You can print a test page to check the condition of the printheads.
