Examples of 'program counter' in a sentence
Meaning of "program counter"
program counter: In computer science, a program counter is a special register that stores the memory address of the instruction to be executed next. It is used to keep track of the current position in a program's execution
Show more definitions
- A register that stores the address of the current (or next) instruction to be carried out by the processor.
How to use "program counter" in a sentence
Basic
Advanced
program counter
Among the registers is the program counter.
Increment the program counter so it points to the next instruction.
The value of the program counter.
The program counter is incremented.
The branch is relative to the current position of the program counter.
The program counter will be loaded on the next clock edge.
Executing the command moves the program counter to the next command.
The program counter stores the memory address of the next instruction to be executed.
Additional information besides the program counter can be recorded at each interval.
The increment by one unit corresponds here to the normal incrementing of the program counter.
The emulation software maintains an emulated program counter to keep track of instruction boundaries.
This system program counter may be used to identify the routine that is interrupted.
Such a packet contains the current program counter value for that thread.
The change from a segment to another requires modifying the value of the program counter.
The increment of the program counter is not explicitly expressed in the program code.
See also
The module controller also contains a collection of registers and a program counter as described herein.
This provision enables any program counter address to be calculated based upon an event.
The CPU fetches instructions from memory to the value of the program counter.
A microprocessor normally includes a program counter for controlling the sequence of executed program steps.
A register AIPC contains the current value of the program counter PC.
Each program counter output causes an instruction fetch from the program that controls the microprocessor.
The comparator compares the address in the program counter with the selected addresses only.
The program counter PC memorises the address of the next instruction to be processed.
His goggles scan Slugs and program counter measures.
Bit program counter PC.
CPUs that do not use sequential execution with a program counter are extremely rare.
There is one program counter for each PSU in the system.
It was called the Program Counter.
The program counter is mapped to memory location 0.
And then it 's going to set the program counter to be the.
Otherwise, the program counter is sequentially incremented.
In a program, time is marked by its own program counter.
Unlike other registers, the program counter is not directly accessible.
The program counter 10 is automatically incremented after the next instruction has been fetched.
Figure 2 shows an embodiment of a program counter and its coupling to an internal bus.
That is then repeated - all under the control of a sequential timer called a program counter.
During an interrupt, the program counter is loaded with the appropriate interrupt vector.
Statistical sampling is the periodic recording of a processor 's program counter or instruction pointer.
Typically, the program counter is available in one of the saved program stack areas.
Using the normal decompression procedure, the process determines the program counter values for each atom.
With a load / store machine, the program counter is sufficient to describe the state of the machine.
PCL - stores the low order bits of the program counter.
The program counter 10 is the only direct interaction available between the two instruction streams.
Conventionally, to detect a trap attempt, the program counter rating the processor operation is doubled.
Reading, Retrieves the instruction from memory by locating it thanks to a program counter.
Resetting the Program Counter to zero effectively restarts the program, albeit in a potentially different state.
BRA - Branch Always - Jump to address where offset has been added to the program counter.
The Program Counter ( PC ) specifies the address of the instruction to fetch for execution.
The address codes for memory 1 are generated by a program counter 5.
Each time an address is accessed, program counter 28 is incremented to a next value.
You'll also be interested in:
Examples of using Program
Show more
We interrupt this program for a special announcement
Program the remote to control your source
We interrupt this program with an important announcement
Examples of using Counter
Show more
Smells like a perfume counter at a department store
Counter with cross to the left cheek
More needs to be done to counter the threats to asylum
