Examples of 'programming button' in a sentence
Meaning of "programming button"
A programming button refers to a specific button or command in a software program or computer system that is used to initiate or execute a specific action. This term is commonly used in the context of computer programming and software development, where programmers use buttons or commands to trigger specific functions or operations in their code
How to use "programming button" in a sentence
Basic
Advanced
programming button
Dose programming button selection kxx espresso.
Press and hold the programming button.
Press programming button to confirm your settings.
Button also serves as the programming button.
Programming button assignment for internal calls.
Press and release the programming button again.
Programming button for learning the functions of your.
Press and release the programming button located on the custom harness.
Programming button with indicator light.
Keep the housing open for better access to the programming button.
Press the programming button of the actuator.
Hold the Down button and release the programming button.
Press the programming button until the timer.
Once the STATUS LED is red you can release the programming button.
Press the programming button behind the door.
See also
Press both the STOP key and the programming button P.
Press the programming button to quit the programming dialog.
There are 3 types of programming button pads.
Press the programming button to activate the programming step.
With the monitor on, press the programming button.
Press programming button b until the opener light goes out.
With the telephone connected, press the programming button.
Use the programming button to access full iPod functionality.
With the monitor connected, press the programming button.
Press programming button until the following message is displayed.
Press and release the programming button 5 times remark.
Programming button for learning the functions of your original remote control.
Press and hold the programming button for 3 seconds.
Programming button for programming the Individual Address.
First, open the receiver and press the programming button.
Press the programming button again to activate the programming dialog.
If the opener light is lit permanently, the programming button was pressed too long.
Press the programming button until the timer indicator light is illuminated.
Depending on the previous manipulations of the user, the programming button can have various functions.
Now press the programming button of the new transmitter until acknowl.
Problem 3 The second end position is not set after the programming button is pushed.
Then press the programming button of the new transmitter to be learnt once.
The LED will remain steadily lit, as will the programming button XL.
Press the programming button until the machine switches over to programming mode.
If the opener light flashes, the programming button was pressed too briefly.
Press the programming button for the driving position you want to call up button 1 or 2.
Pull out up back part of the remote control to access IN / EX programming button.
Release the programming button when the LED lights up.
Select the desired program using any + / - on the programming button.
Press now programming button OP to save coding.
Select a stage using + / - and press ENtER on the pROGRAMMING BUttON.
Press and hold the programming button until the STATUS LED turns off.
Select CUStOM stage using + / - and press ENtER on the pROGRAMMING BUttON.
Push the programming button for a minimum of 3 seconds.
Then, release the programming button.
You'll also be interested in:
Examples of using Button
Show more
Humid steam button depending on the model
You are in a danger of loosing this button here
Press the button to access this function
Examples of using Programming
Show more
Convenient sequence programming with graphic symbols
Programming mode only for physical address
This is a simple programming system for recorders
