Examples of 'proper cutting' in a sentence
Meaning of "proper cutting"
proper cutting: This phrase typically refers to a technique or method of pruning or trimming something, such as plants or trees, in a correct and precise manner. It implies that the cutting is being done appropriately and according to established guidelines
How to use "proper cutting" in a sentence
Basic
Advanced
proper cutting
Proper cutting of the paper is important.
Adjust base plate for proper cutting depth.
Use of proper cutting boards is recommended.
Test area to be trimmed for proper cutting height.
Always use the proper cutting stance described in this section.
Bevel cuts require special operator attention to proper cutting.
The blade is preset to the proper cutting depth at delivery.
Select the proper cutting position for your workpiece by referring to the figure.
Perform test spray to verify proper cutting of glass strands.
Select the proper cutting nozzle for the amperage setting selected.
The opening prevents blockings and ensures proper cutting.
Minimize potential injury by proper cutting tool and machine maintenance.
Determine if backlapping or grinding will restore the proper cutting edge.
Choose the proper cutting height according to the types and conditions of the grass.
Be sure to use the proper blade to insure proper cutting performance.
See also
Following proper cutting procedures will prevent stripping the bark from the main member.
Cut tubing to desired length using square cuts and proper cutting device.
ALWAYS use the proper cutting tool for the job.
Proper Cutting Stance - Weight should be balanced on both feet - feet on solid ground.
Bevel cuts require special operator attention to proper cutting techniques - especially guidance of the saw.
Select the proper cutting position for your workpiece by referring to the figure . Fig.
Rough Diamonds exhibit a greasy luster, but proper cutting give them a powerful adamantine luster.
Never use a cross-handed grip . left-handers should follow these instructions too . keep a proper cutting stance.
Figure 7 shows proper cutting position.
Conveyor Cart ( 4 ) with the material from under the wheel to set proper cutting height.
See “ Basic Cutting ” in this manual for proper cutting technique.
Keep the SAFE-T-TIP nose guard on your saw 's guide bar, and use proper cutting techniques.
The cutter deck should be level from side-to-side for proper cutting performance.
You'll also be interested in:
Examples of using Cutting
Show more
When cutting a branch that is under ten
Never operate without cutting coolant or paste
Cutting threads to profile girders not required
Examples of using Proper
Show more
This is to ensure proper operation of the motor
Proper assembly is important to prevent risk of collapse
We will give you a proper tour tomorrow
