Examples of 'properties measured' in a sentence
Meaning of "properties measured"
In the context of science or physics, properties measured refers to the specific characteristics or attributes of a substance or object that are being quantified or evaluated through scientific testing or analysis
How to use "properties measured" in a sentence
Basic
Advanced
properties measured
Properties measured ahb number of specimens tested.
The particles are collected in a baghouse and their properties measured.
The properties measured can be used to control the process.
See table below for compositions and properties measured.
The properties measured depend on the composition of the liquid.
Next a variety of luminaires are examined and their properties measured.
The elastic properties measured through nanoindentation are used as input data.
Fibers were collected in a spool and physical properties measured following standard tests.
The properties measured to evaluate the plasticiser effect are shown in the table below.
Wireline logs can be divided into broad categories based on the physical properties measured.
The properties measured on products of the same type with each centrifuge are also compared.
Increasingly effective solutions will be developed successively for the entirety of the four properties measured.
The properties measured with respect to HSIS alone were as follows.
The final sheet was able also to run through the dryers and its properties measured.
Newbury from each of these samples and the properties measured in accordance with ASTM procedures.
See also
The properties measured are collated in table III.
Table I lists these and other geometric properties measured after tentering.
The properties measured are collated in table IV.
The polypropylene was molded into ASTM type I tensile bars and the properties measured.
The fabric properties measured for four sample runs are shown in Table LA.
Table 4 summarizes the sound absorption properties measured.
The results for the properties measured in the molded product appear in Table I.
Table 1 lists the components produced and also presents a survey of the properties measured.
The properties measured for each are shown in Table I.
The formulations used and the properties measured are set out in table 9 below.
The properties measured for each blend are reported in Table I.
The measurement results for the properties measured are presented in Table 4.
Properties measured by high-resolution gas chromatography.
These are the properties measured in standards,.
On the one hand, an ANN calculates offline material properties from properties measured online.
The mechanical properties measured on these pipes are presented in Table I.
Samples were molded, and the physico-mechanical properties measured are reported in Table 3.
The properties measured on sheets are the following,.
The composite coatings were cured and properties measured as in Examples 1 through 4 above.
The properties measured are collated in table 4.
Table 1 shows a comparison of various physical properties measured for the compositions of Examples 1 and 2.
The properties measured with respect to the interlayer were as follows,.
The following table 2 gives the properties measured for each of the formulations prepared.
The properties measured on completely densified specimens are given in the following table,.
The average results for the properties measured are given in Table 1 below.
The properties measured in this type of joint for each plate were,.
Data, for example related to properties measured by a sensor of the device ;.
Common properties measured include magnetism, specific gravity and electrical conductivity.
The variations of SiO2/Na2O in the glass and the properties measured are summarized in Table 1.
The properties measured were as follows,.
A sample ( Comparative Example H ) was removed and its powder properties measured ( see below ).
The mechanical properties measured on the composite are as follows,.
A film of 1mm thickness was hot pressed at 180°C for 2 minutes and the mechanical properties measured.
Table 5 lists the properties measured for each of the samples.
The mechanical properties TS, EB and M100 are the initial properties measured after 4 days.
You'll also be interested in:
Examples of using Measured
Show more
The measured values shall be plotted on a graph
Asteroid composition is measured by radar and seismometry
You measured right up to him this afternoon
Examples of using Properties
Show more
Check the acoustic properties of the medium
These properties will be useful in refrigeration equipment
If marked the below properties will be available
