Examples of 'protective grille' in a sentence
Meaning of "protective grille"
A protective grille refers to a physical barrier or mesh-like structure designed to safeguard or shield something from potential damage, impact, or interference
How to use "protective grille" in a sentence
Basic
Advanced
protective grille
The protective grille must engage firmly.
Ventilation and protective grille.
Protective grille against leaves falling in.
Do not insert any objects through the protective grille.
Remove the protective grille and headlight.
Do not install the tweeter without the protective grille.
Insert the protective grille and press it in.
Do not switch the fan on without protective grille installed.
Attach the protective grille to the front side.
Unscrew the fixation-screw of the protective grille.
Remove the protective grille for fog lights.
After cleaning, it is essential to put back the protective grille.
Protective grille for folding and tilting windows.
Pull on the hook in the direction of arrow 1 to remove the protective grille.
The protective grille must always be installed during operation.
See also
After each use, take the protective grille out of the paraffin bath.
The protective grille in the pellet container must not be removed.
Clean the cooling fins on the cylinder, the fan and the rotating protective grille.
Take the protective grille out of the paraffin bath.
By pulling the hook in direction of arrow 1, remove the protective grille in.
Keep the protective grille in position on the loudspeaker at all times.
Once clean, put it back in and close the protective grille 11.
The traditional steel protective grille is intended for use behind the rear seat.
Figure 7, Pellet tank with protective grille 1.
With movable protective grille in the back for climbing into or loading the vehicle.
Model IW103 incorporates a detachable protective grille.
Screws for protective grille rear 4 pieces.
Protective grille for removing fog lights - plug for Park Assist sensor.
Installing the towing eye - Grasp the protective grille at the point marked with the arrow.
Protective grille b Leg 1 In case of bottom suction, remove the air filter.
Step 10, Replace the protective grille and tighten the screw.
Remove the protective grille in the direction of the arrow 1.
Step 4, Remove the protective grille.
Loosen the protective grille by pulling the hook in the direction of arrow 1.
To insert, insert the protective grille in the opening and push in gently.
Remove the protective grille for fog lights - sensor plug for parking assistance.
Tighten the protective grille with the attachment screw ( 2 ) supplied.
Then the protective grille ( 1 ) in the pellet tank may be removed.
You'll also be interested in:
Examples of using Grille
Show more
Remove the intake grille by pulling it outwards
Grille when the grille function is used
Replace the base grille when finished
Examples of using Protective
Show more
Take protective measures against inhalation of dust
They are using those protective blisters again
The protective strip may be replaced if damaged
