Examples of 'psig' in a sentence
Meaning of "psig"
Psig (adjective) - A unit of pressure relative to the surrounding atmosphere, typically used in the measurement of industrial processes
Show more definitions
- Pounds per square inch, gauge (unit of pressure)
How to use "psig" in a sentence
Basic
Advanced
psig
Specified test pressures are gauge pressures psig.
Psig is a unit of pressure relative to the surrounding atmosphere.
It is expressed as psig.
Psig refers to pounds per square inch gage.
Minimum and Maximum pump pressure PSiG.
Psig refers to pounds of pressure per square inch.
The ethylene partial pressure was increased by 3 psig.
This depression can be 1 psig or more on some intake systems.
The ethylene pressure was adjusted to 5 psig.
Available, with both psia and psig configurations available.
The reactor outlet was maintained at 1 psig.
Adjust the zero screw to obtain 9 psig output pressure if it has changed.
The ball pressure is now closer to the 9 psig target.
Pressures greater than about 40 psig result in a more efficient degassing reaction.
Prepolymerization is then started by pressuring the reactor to 30 psig with ethylene.
See also
The reactor was pressurized to 30 psig with hydrogen and vented down to atmospheric pressure.
The reactor was then pressured with nitrogen and held at 5 psig.
Fluidizing air pressure is gradually raised to 15 psig during the addition of water.
Close the outlet vavle or regulator when the tank pressure is approximately 20 psig.
The suspension is hydrogenated at 30 psig hydrogen gas until hydrogen gas uptake ceases.
Preferably the partial pressure of carbon dioxide is maintained at 50 psig or greater.
The reactor was pressurized to 30 psig with nitrogen gas and vented down to atmospheric pressure.
The hopper was closed and pressurized to 1 psig with dry nitrogen.
A 1 psig cracking check valve on the tygon tubing prevented overpressures on the sparger line.
The scrubber may be operated under pressures of up to 50 psig to improve efficiency.
Air at 40 psig was used to atomize the liquid.
The reactor was pressurized with nitrogen to provide a 5 psig pad on the reactor.
A 5 psig pad was left on the reactor.
The ice maker requires a continuous water supply with a minimum pressure of 15 psig.
Nitrogen was applied through a pressure holder to approximately 40 psig to facilitate the filtration process.
Set the zero adjustment screw until output pressure gauge reads 9 psig.
For example a rubber basketball is normally pressurized to 9 psig with air for optimal playability.
The stirrer was turned on and the system was pressurized with ammonia to about 2 psig.
The purged solution was then shaken and pressurized to 45 psig with hydrogen at ambient temperature.
Solid tube pistons typically operate at working pressures in the range of about 80 psig.
A stream of UPC air at about 2 psig is passed over the mixture.
The headspace of the autoclave was then pressurized with an additional 50 psig nitrogen gas.
Hydrogenation was initiated at 15 psig hydrogen pressure at room temperature.
If it is not, slightly adjust the specific gravity knob to obtain 3 psig output pressure.
Air at 50 psig was used to atomize the solution in the spray nozzle.
The resulting suspension was stirred overnight at ambient temperature under 30 psig carbon dioxide.
Pressures higher than 90 psig will reduce the life of the tool.
The completed reaction mixture was stirred at room temperature under about 60 psig hydrogen overnight.
Reactor pressure is maintained at 100 psig throughout reaction by adding ethylene as required.
The reaction channels and heat exchange channels operate at an average pressure of about 20 psig.
The bottle was pressurized to 60 psig with pure hydrogen.
The pressure of the system was maintained at 50 psig.
The blasting was done using 90 psig vacuum induced pressure.
The resulting mixture was placed in a Parr hydrogenation apparatus and pressured to 50 psig hydrogen.
The pressure was then decreased to 0 psig at a rate of 3 psig / minute.
