Examples of 'pull cable' in a sentence
Meaning of "pull cable"
Pull cable: Refers to the action of pulling a cable, typically to activate a mechanism or device
How to use "pull cable" in a sentence
Basic
Advanced
pull cable
Do not pull cable around sharp objects.
In this embodiment, only one pull cable is required.
Pull cable through cable clamp in terminal box.
Do not kink or pull cable around sharp corners.
Pull cable through cable entry.
A towing sock used to pull cable through a tube.
Pull cable out of drum and feed into drain.
Push pull cable.
Pull cable backward until throttle lever contacts the.
Loosen cable clip and pull cable up to remove slack and retighten clip.
Pull cable out of the base unit to the required length.
It can also eliminate the need to pull cable through walls and ceilings.
Pull cable through bracket and into the metal housing.
Pass the free end of the pull cable through the plastic guide in RH Handle.
Pull cable wire through the slide and lift the slide slightly.
See also
Just because I still pull cable sometimes for the phone company.
Pull cable out of drum and allow cable to feed itself into the line.
In addition, the assembly can be incorporated into a pull cable starter.
Gently pull cable from earphone.
When using the vi cable with microphone, gently pull cable tight to remove slack.
Insert the push pull cable on the right hand side into the cable guide.
When the clamping has been completed, pneumatic means 8 pull cable 6.
Pull cable through UL Listed or CSA Approved strain relief in terminal box.
As a result, the length of the pull cable can be adjusted particularly precisely.
Pull cable through cable gland r, ring q, gasket p and upper part of terminal box o.
Remove securing pin, manually pull cable forward, secure in forward bracket.
The top pull cable configuration is more commonly seen on mountain bikes without rear-suspension.
Loosen screw ( K ) and pull cable to obtain desired brake tension.
Pull cable through UL Listed / CSA Certified strain relief in terminal box.
The pull cable of the second mounting aid H 2, which was previously tensioned, is hereby loosened.
