Examples of 'pull rod' in a sentence
Meaning of "pull rod"
pull rod: 'Pull rod' refers to a mechanical device or lever used to activate or control a mechanism by pulling it in a specific direction
How to use "pull rod" in a sentence
Basic
Advanced
pull rod
The pull rod is sleeved with a spring.
Removing the shaft and pull rod.
Pull rod out of the slide tube rope.
Another pin is mounted on the right pull rod.
The left pull rod has a protrusion thereon.
The locking device is fixed on said pull rod.
Then pull rod into slot and slide in completely.
The handle at the end of the pull rod can be other shapes as desired.
The pull rod is axially mounted through the pull piece.
Preferably, each of the valve cores includes a pull rod.
Lower pull rod speed.
Thus, the ball engages in an annular groove of the pull rod.
The right pull rod has another protrusion thereon.
When the speed of 75 knots is reached, the pull rod with a lighter.
A bottom end of the pull rod is insertedly connected to a sealing plug.
See also
Designed to separate or reclamp jaws 21 depending upon whether pull rod 41 is pulled or pushed.
The clutch pull rod connects to the arm on the pivot shaft.
Seat according to claim 18, wherein the traction member is of a manually operable pull rod type.
The first pull rod is axially inserted through the first support.
The cutting actuator 52 pivots clockwise to pull rod 56 proximally after a cutting procedure.
Use the pull rod handle to slide pull rod back to its starting position.
The wind turbine is further held against the underside of vessel 1 by tightening pull rod 61.
One end of the left pull rod is connected with a left lift board.
Pull rod battery speaker, professional speaker, plastic speaker, computer speaker, speaker.
A rear end of the first pull rod is sleeved with the first spring.
The pull rod is advantageously made from steel whose thermal expansion coefficient is known precisely.
A front end of the first pull rod is connected with the first pull rope.
Pull rod 73 has at its opposite end a flexible connection universal ball connector 83.
One end of the right pull rod is connected with a right lift board.
The pull rod is under tension and releases with pressure!
Zone 7 now has only one driven pull rod system ( due to the limited length ).
A release pull rod B push clamp lever C draw back the pull rod into the gun barrel.
FIG . 2 is a partial section showing the pull rod in its position immobilizing the device ;.
Figure 5.6a, Pull Rod Handle and Access Slot shown without venting attached for clarity purposes only.
Also, each holding slat has its own pull rod 872 for rotating its cam mechanisms.
The pull rod may be straight or, as shown in FIG . 1, have curved ends.
Draw back the pull rod up to the end position 3.
Obviously, the pull rod 30 may also be inserted into an inverted position.
The right pull rod 77 is lowered.
Austrian producer of tie and pull rod systems reduces procurement costs considerably with ORDERFOX. com.
One side of a pull rod 13 is secured to said pressure element 12.
The inner end of the pull rod 10 terminates at a stop plate 27.
Jaws 21 are connected to a pull rod 41 forming rotational axle A and represented in detail in FIG . 5D.
You'll also be interested in:
Examples of using Rod
Show more
A guide rod is in place to ensure correct positioning
Do not touch the rod during operation
My rod and my staff shall discomfit thee
Examples of using Pull
Show more
We can not pull out all of a sudden
Pull out for soft water service
Pressing concerns pull mind from task
