Examples of 'puller wire' in a sentence
Meaning of "puller wire"
puller wire: This phrase is commonly used in the context of electrical wiring or cable installation. It refers to a tool or device designed to grip, tug, or tighten wires during the installation or repair process
How to use "puller wire" in a sentence
Basic
Advanced
puller wire
Unidirectional catheters use a single puller wire.
The distal end of each puller wire is anchored to the tip section.
The coating imparts lubricity to the puller wire.
A puller wire extends through the catheter body and into the tip portion.
If bi-directional deflection is desire, more than one puller wire becomes necessary.
Each puller wire extends from the control handle through a lumen of the catheter body.
A catheter of claim 1, further comprising a first puller wire to manipulate deflection of the intermediate section.
RTM . nylon tubing, where the Teflon coating imparts lubricity to the puller wire.
Second, the puller wire extends coaxially within the catheter body.
The steerable catheter of Claim 1, further comprising a lubricious coating surrounding the puller wire.
Proximal ends of each puller wire are anchored in the control handle 16.
Preferably, a flexible, compressible, lubricous sleeve surrounds the puller wire in the tip portion.
That is, the puller wire must extend through the catheter off-axis.
Each of diametrically opposing first and second lumens 26 carries a puller wire 36 for bi-directional deflection.
The first lumen 26 carries a puller wire 42 for unidirectional deflection of the intermediate section.
See also
A compression coil 52 is situated within the catheter body 12 in surrounding relation to the puller wire 50.
Each puller wire 42 is made of any suitable metal, such as stainless steel or Nitinol.
For bi-directional deflection, the diametrically opposing second lumen 26b carries a second puller wire 32b.
Preferably each puller wire has a coating, such as a coating of Teflon . RTM . or the like.
Proximal hypotube 331a provides a passage way for puller wire 327a and prevents kinking of the wire.
Preferably, each puller wire 44 is covered with a lubricious coating such as PTFE or a similar material.
Puller wire 44 is threaded through the plug.
The first lumen 26a carries a puller wire 32a for deflection of the intermediate section.
The puller wire 64 is provided for deflection of the intermediate section 14.
Alternatively, the puller wire 50 can be attached to the side of the tip section 14.
Each puller wire 26 is preferably coated with Teflon ™.
The single puller wire 44 connected to the tip electrode 38 provides bi-directional control.
You'll also be interested in:
Examples of using Puller
Show more
Use a bearing puller to remove the bearing
We may have found our string puller
Tighten puller screw against shaft end
Examples of using Wire
Show more
Steel wire liners can be coated or noncoated
Use a passage aid wire or previous cord
Cut wire liner at the right length
