Examples of 'pulse mode' in a sentence
Meaning of "pulse mode"
Refers to a setting or mode on a device or equipment that allows it to operate in a pulsating or intermittent manner. In the context of medical devices, pulse mode often refers to a specific setting for therapies or treatments delivered in a rhythmic or intermittent pattern
How to use "pulse mode" in a sentence
Basic
Advanced
pulse mode
For pulse mode mixing at brief intervals.
Set speed or use the pulse mode.
Pulse mode allows use with a laser detector.
Shift mind controller to coquettish pulse mode.
Pulse mode may not be available in some countries.
Key switch input level or pulse mode.
Pulse mode is confirmed by a single high beep in the earpiece.
A laser could instead be operated in pulse mode.
Pulse mode for use with detector sold separately.
A further alternative mode is the pulse mode.
Setting laser tool to pulse mode allows use with.
These pixel detectors operate in a pulse mode.
Pulse mode electron generator.
The switching delay is not available in pulse mode.
Optional pulse mode for precise fastening and convenient drilling.
See also
Allows activation of the pulse mode.
Set the dial mode pulse mode or temporary tone mode.
Switch to maximum speed or use the pulse mode.
External pulse mode for determining heart rate at any time.
This is achieved with a pulse mode ion source.
This grid is supplied by a relatively low voltage in pulse mode.
These ambiguities are due to the pulse mode functioning of the radar.
This embodiment is compatible with operation of the source in pulse mode.
Setting laser unit to pulse mode allows use of optional laser detectors.
You are already in pulse mode.
The pulse mode position is located to the left of the zero position.
The preceding algorithm was developed on the assumption of pulse mode operation.
Change the dial mode from pulse mode to temporary tone mode.
It has been indicated that the laser source works in pulse mode.
In the pulse mode the size of the restriction is varied on a cyclic basis.
This is why most modern electronic metronomes have a light pulse mode.
More uniform coating can be provided by a pulse mode of the electrospinning process.
Typically each system is equipped with first and last pulse mode.
Use the pulse mode by pressing the start button for a short time.
This detector will only work when the laser is in the pulse mode.
The pulse mode is used for increasing the speed to maximum for a short time.
The laser detector is intended to localize laser beam sent out in pulse mode.
Some light sources may be operated in a pulse mode using pulse mode drive current.
The electron beam generator according to the invention also operates in pulse mode.
Most of these devices are always in search pulse mode sending out low magnetic waves.
Pulse Mode for more power and vapor.
For greater control use the Pulse mode.
TIG pulse mode selector is on the left of the main control.
The brightness of the beam appears to be reduced when in Pulse mode.
Select Pulse mode as above and dial the pulse digits.
Redialing will be mixed mode if in Pulse mode when redial is attempted.
Use Pulse mode to cover small areas and uneven surfaces.
The only difference is the stepwise scanning manner of IPL spot because of pulse mode.
The Pulse mode is used to weld pieces whilst minimising the increase in temperature.
Left LED lights blue when pulse mode on.
You'll also be interested in:
Examples of using Pulse
Show more
The pulse only lasts a couple of microseconds
I can not get a pulse on the doppler
His pulse and respiration are below normal
Examples of using Mode
Show more
Automatic mode should be selected in normal cases
We have even developed a secret mode of communication
Void mode transaction counter and total
