Examples of 'pump casing' in a sentence
Meaning of "pump casing"
A pump casing is a protective enclosure or housing that surrounds a pump. It is typically made of a durable material, such as metal or plastic, and is designed to provide structural support and prevent leaks or damage to the pump components. The casing helps to maintain the integrity and efficiency of the pump by keeping out debris, maintaining pressure, and facilitating fluid flow
How to use "pump casing" in a sentence
Basic
Advanced
pump casing
You and me called it an oil pump casing.
Do not open the pump casing or motor housing.
You and me call it an oil pump casing.
The whole pump casing is less susceptible to vibration.
Vent gases off the pump casing.
Volute shaped pump casing with splitter rib.
Reduces the strain on the pump casing.
Pump casing is made of cast iron.
The connection means hold the pump casing in position.
The pump casing and the lobes are manufactured in stainless steel.
Do not fit the impeller or pump casing to other engines or transmissions.
An impeller or series of impellers are mounted on a shaft within the pump casing.
Wash the pump casing and fit the inlet filter back on.
You can now work easily as the pump casing has been freed.
The electrical supply should be the same as detailed on the pump casing.
See also
A typical suction pump includes a pump casing that defines a pump chamber.
There is also a discharge outlet typically located at a periphery of the pump casing.
Drain pump casing after each use rinse if you were pumping dirty water.
Both the rigidity and the intensity of the pump casing are enhanced.
Substantial wear of the pump casing can undesirably result in reduced discharge flow rates.
The said damping element is connected to the said pump casing by snap engagement.
The pump casing and suction bell were also coated and protected internally and externally.
The pump insert may be adapted to be located adjacent a suction branch of a pump casing.
The rotors are disposed in the pump casing sandwiched between a head cover and a gearbox.
The pump may also comprise an outer housing which encases the pump casing.
Remove priming plug and add water until pump casing is filled up with water.
Pumps are rotating machines that increase the pressure of fluids travelling through the pump casing.
But inspectors could not open the pump casing to confirm the cause of the problem.
VERY slowly and carefully continue to lower the replacement stack into the pump casing.
External pumps necessitate passageways through the pump casing to bring oil to bearings and gears.
Pump casing showing little wear to the coating after 6 years in service.
An integrated spiral chamber is pressed between the pump casing and the impeller.
A centrifugal pump casing of a centrifugal pump comprising,.
The motor may similarly be effortlessly removed from the pump casing and replaced.
Accordingly, the pump casing is prevented from being deformed.
Insufficient priming water inside pump casing Prime fully.
Fig . 9 shows a pump casing made of sheet metal having a casing supporting member.
The noise becomes more considerable if the pump casing is made with a thin sheet steel.
Install a new o-ring on the upper flange of the pump casing.
Therefore, the pump casing is prevented from being deformed due to the piping forces.
Re-assembly of the motor unit into the pump casing.
A canned-motor pump has a pump casing for housing a canned motor therein.
Finally, the stuffing box is linked to the pump casing.
Advantageously, the pump casing closure element may define a portion of a pump sealing arrangement.
Thus, the production cost of the pump casing can be reduced.
In some embodiments, the pump includes an outer housing which encapsulates the pump casing.
Conveniently, the element support surface of the pump casing may be integrally formed therewith.
In another refinement, this is carried out without removing the pump casing.
The height dimension including the drain pump casing extending below the motor is 75mm.
FIG . 1 shows a liner ring of the present invention which is incorporated in a pump casing.
You'll also be interested in:
Examples of using Pump
Show more
Clean the pump at least twice a year
Check that the drain pump is level
However the pump can be activated in commissioning
Examples of using Casing
Show more
We found a bullet casing on the quay side
Casing made of fiber glass reinforced polyester
Any conventional bomb casing will spaghettifi
