Examples of 'pump efficiency' in a sentence
Meaning of "pump efficiency"
pump efficiency: a measure of how well a pump converts input power into the desired output flow and pressure
How to use "pump efficiency" in a sentence
Basic
Advanced
pump efficiency
Gas can also degrade pump efficiency.
Heat pump efficiency is almost doubled.
Lowest and most volatile of these is pump efficiency.
The pump efficiency could potentially be reduced further.
This produces improved pump efficiency.
Higher heat pump efficiency with lower water temperatures.
A measure of heat pump efficiency.
Pump efficiency is an important aspect and pumps should be regularly tested.
This information can be used to determine the pump efficiency.
In that case the pump efficiency of the system would be reduced.
The loose seals will reduce friction and increase pump efficiency.
Pump efficiency is really an important feature and pumps should be regularly tested.
The primary purpose of the dilution is to improve the pump efficiency at low pressures.
Pump efficiency is important and must be taken into account when leaving pumps.
The power equation implies that the pump efficiency is unchanged at the two speeds.
See also
The efficiency of the CPS increases monotonically with increasing pump efficiency.
Much higher heat pump efficiency means much lower heating energy costs.
However, large tolerances may reduce pump efficiency.
This reduces pump efficiency as the volume of solution pumped in each pump rotation drops.
What future developments in heat pump efficiency are in the pipeline?
The pump efficiency Ep is improved when the flow rate Q is high.
As a result, a low pump efficiency is obtained.
Pump efficiency monitoring and management at Melbourne Water.
In comparison with scfm, it provides an index of compressor pump efficiency.
Maximum heat pump efficiency which can be optimised up to the cOP7 value.
As the pump hose wears, the pump efficiency diminishes.
Accordingly, the vibrations of the pump can be used to enhance the pump efficiency.
Pump efficiency ( calculation of duty point should be carried out carefully ).
Accordingly, cavitation can be suppressed so that the pump efficiency can be improved.
Pump efficiency varies based on total head ( vertical axis ) and the flow ( horizontal axis ).
Accordingly, cavitation can be suppressed, and the pump efficiency can be improved.
Pump Efficiency - manufacturer, factory, supplier from China.
Specifically, it is seen from this graph that the pump efficiency is improved.
Efficient compressors, variable speed compressors and larger heat exchangers all contribute to heat pump efficiency.
Improves acceleration, top speed, pump efficiency and thrust.
A short, large diameter hose will provide lower fluid friction and improve pump efficiency.
Real-time clock allows energy saving routines and pump efficiency calculations.
Second, the total axial clearance is less, allowing better pump efficiency.
Agricultural engineer, Topmotors, agricultural pump efficiency.
The use of flow straightening vanes A201 can be important for pump efficiency.
You'll also be interested in:
Examples of using Pump
Show more
Clean the pump at least twice a year
Check that the drain pump is level
However the pump can be activated in commissioning
Examples of using Efficiency
Show more
Improve the energy efficiency of a shopping centre
Efficiency and emissions requirements of combustion equipment
Liberalisation enhances efficiency of local insurance market
