Examples of 'pump housing' in a sentence
Meaning of "pump housing"
pump housing: This phrase describes the component of a pump system that encloses and protects the pump mechanism. It is commonly used in engineering, construction, or maintenance contexts when referring to the housing or casing of a pump
How to use "pump housing" in a sentence
Basic
Advanced
pump housing
The pump housing should also be cleaned.
Remove the screws and pump housing.
Plastic pump housing and manufacture thereof.
Pull object out of the pump housing.
Unlock the pump housing locking nut by turning it.
Combination motor endshield and pump housing.
The pump housing is not filled with liquid.
Refit and securely tighten the pump housing.
Do not touch the pump housing or motor during operation.
There is an arrow on the pump housing.
Carefully place the pump housing assembly in front of the.
Also a vent hole is drilled in the pump housing.
Fill pump housing through filling opening with liquid.
The filter is located inside the pump housing.
Slide the pump housing away from the gear housing.
See also
Electric motor with pump housing.
The pump housing includes a pump inlet and a pump outlet.
The rotor is placed in the bore of a pump housing.
Some dishwashers have the pump housing as part of the sump.
The piston should move freely in the pump housing.
Insert the pump housing assembly into the front of the sprayer.
A pump is arranged in the pump housing.
Unscrew the pump housing and pull out the impeller unit.
Position the control panel on the pump housing and.
The pump housing material may contain small trapped air bubbles.
You should be able to open the pump housing by hand.
The pump housing support is associated with the casing of the pump.
Install the new motor into the pump housing.
The directional arrow on the pump housing shows the direction of flow.
Position the front cover over the pump housing.
After the pump housing was attached to the propeller the maintenance cover was removed.
The float switch cable is attached to the pump housing.
Thread the set screw into the pump housing and tighten securely.
Carefully pull the transducer wire out of the pump housing.
The pump has a pump housing with a curved surface and a pump rotor.
Oil fill and adjacent area on air pump housing.
The described arrangement comprises a pump housing and a sensor housing attached thereto.
Pull the piston and spring off of the pump housing.
The pump housing and pressing element are often manufactured as a self contained unit.
In an embodiment of the invention the pump housing comprise a cap.
Scrub the pump housing with an appropriate cleaning solution using the brush provided.
The circumferential wall of the pump housing may be casted.
There is also a discharge outlet typically located at a periphery of the pump housing.
Place the spray tip onto the pump housing and turn it.
It is convenient for the expansion chamber to be defined within the pump housing.
Increasing the thickness of a cast steel pump housing results in the pump being heavier.
Clean and firmly insert into intake opening on pump housing.
The motor housing is connected to the pump housing vía a resilient fluid sealing member.
Install the new transducer assembly into the pump housing.
Oil is sprayed into the pump housing during the assembly process at our factory.
You'll also be interested in:
Examples of using Housing
Show more
Improved land and housing policies implemented
Housing systems for other livestock categories
Proportion of makeshift housing at the national level
Examples of using Pump
Show more
Clean the pump at least twice a year
Check that the drain pump is level
However the pump can be activated in commissioning
