Examples of 'pump inlet' in a sentence
Meaning of "pump inlet"
Describes the point or opening through which a fluid, such as a liquid or gas, enters a pump for further processing, circulation, or movement. It is typically a designated entry point designed to ensure efficient and controlled flow into the pump
How to use "pump inlet" in a sentence
Basic
Advanced
pump inlet
Keep the pump inlet screen clean.
Install proper filtration on pump inlet plumbing.
Keep the pump inlet screen clear.
Install a pressure gauge in pump inlet line.
Keep the pump inlet clean at all times.
Remove pump saver from pump inlet.
Make certain pump inlet hoses are clear and unblocked.
Connect water source to pump inlet.
Keep the pump inlet free of debris and foreign objects.
Regularly flush oil pump inlet oil filter.
Keep pump inlet clean and free of all foreign objects.
Water pressure at pump inlet is too low.
Attach hose on pump saver can to pump inlet.
Reconnect water source to pump inlet and turn on water source.
Thread the garden hose to the pump inlet.
See also
Remove the water pump inlet to access the impeller area.
Small air leak at pump inlet.
Keep the pump inlet free of debris or foreign material at all times.
Periodically clean the pump inlet.
Check all valves on pump inlet and discharge sides of system to be sure they.
Pressure depression at pump inlet.
Strainers are used to pump inlet lines where pressure drop must be kept to a minimum.
Pressure drop below atmospheric at the pump inlet kPa.
The pump can have a pump inlet and a pump outlet.
Install the supplied filter sponge to keep the pump inlet free.
Recon nect water source to pump inlet and turn on wa ter source.
At a minimum height of suction lift of water from pool surface to pump inlet.
Component cooling pump inlet header.
The charge pump outlet is coupled to the main steering pump inlet.
Pressure differential from pump inlet to pump outlet kPa.
The pump inlet may draw the fluid droplets into the pump.
The pump housing includes a pump inlet and a pump outlet.
Attach the bottom end of the main water line to the pump inlet.
A partial vacuum is created at the pump inlet as the teeth disengage.
Keep pump inlet clean and free of all foreign objects and inspect annually.
A partial vacuum is created at the pump inlet as the gear teeth unmesh.
This is the clear hose that connects the hydraulic tank to the pump inlet.
Some air injection systems use a pump inlet filter that can be replaced if necessary.
The closed loop can comprise a temperature detector arranged close to the pump inlet.
The impeller pushes fluid received through the pump inlet out through the pump outlet.
The fluid level of the reservoir in many mobile applications is below the pump inlet.
Make sure you have water supply to pump inlet connected and turned ON.
The container fluidly communicates with the collapsible tube through the tube pump inlet valve.
The pressure at the pump inlet is too low Check and make sure that.
Fix the pipes with cable ties to the pump inlet and outlet.
Then connect the water pump inlet to the water filter / softener outlet if present.
System water from the heat exchanger is then recirculated into the pump inlet tubing.
Re - con nect water source to pump inlet and turn on wa ter source.
The PCC was added to the fan pump inlet.
Plumb the booster pump inlet higher, upstream and as far away as possible from a chlorinator.
You'll also be interested in:
Examples of using Inlet
Show more
Attach inlet and discharge hoses to pump
Check and clean inlet hose screen
Place inlet hoses inside washer basket
Examples of using Pump
Show more
Clean the pump at least twice a year
Check that the drain pump is level
However the pump can be activated in commissioning
