Examples of 'pump shaft' in a sentence
Meaning of "pump shaft"
A pump shaft is a rotating component of a pump system that transmits mechanical power from a motor to the impeller, which is responsible for moving fluid through the pump. It is typically a cylindrical or solid rod with a central axis, designed to withstand the forces and torque generated during the pumping process
How to use "pump shaft" in a sentence
Basic
Advanced
pump shaft
Pump shaft bearing failing on dredging job.
Verify that the pump shaft turns freely.
The pump shaft speed is provided by a prime mover.
Lubricant retainer for pump shaft bearing assembly.
Unscrew pump shaft coupling assembly from motor shaft.
Remove the dowel pin on the pump shaft.
Make sure the pump shaft spins freely.
Gland bolts are attached to a bearing assembly for the pump shaft.
Rotate the pump shaft in order to reach two lever boltsA.
It was discovered that there was a leak in the pump shaft.
Rotate the pump shaft so the piston is in the top dead.
Prime the pump as above and check the rotation of pump shaft.
Pump shaft should be completely dry before moving on to the next step.
One employs a dc motor and a long pump shaft to the underground impeller.
Motor and pump shaft are offset for most efficient force utilization.
See also
The outlet passageway is angled relative to the axis of the pump shaft.
Do not turn the pump shaft when the setting screw is not in place.
The centrifugal pump is driven by an electric motor directly coupled to the pump shaft.
Bolt the piston assembly to the pump shaft using the lever bolts.
The pump shaft is mounted in axially fixed position with respect to the pump body.
The element of the machine mechanical assembly and the pump shaft are concentric.
Install the dowel pin on the pump shaft and loosely assemble the shaft coupling.
The upper motor section includes a motor which is coupled to drive the pump shaft.
The motor shaft also serves as the pump shaft which carries the impeller.
The bearing cartridge operates against the journal which is shrunk fit on the pump shaft.
A motor also having a shaft is coupled to the pump shaft to provide the rotating movement.
Pump shaft connected to the shaft of the turbine engine ;.
In one embodiment the pump closure element may define a portion of a pump shaft sealing arrangement.
Preferably, the pump shaft crosses said casing at the elbow.
The gland seal assembly typically has a cylindrical bore through which the pump shaft passes.
The pump shaft is joined to another gear pump having the following characteristics,.
Direction of rotation CCW when looking at pump shaft.
Hence, in practice, the pump shaft speed of the hydraulic pump is maintained substantially constant.
The pump handle can be mounted on either side of the pump shaft A.
The pump shaft extends through a hole in the rear wall 4 of the pump housing.
The co-op received the bearing and pump shaft.
Pump shaft 24 is configured to be generally perpendicular to the flat surface.
In other words, this second segment does not cross the pump shaft.
A pump shaft 7 supported by bearings 9 mounted in the housing 3 extends into the pump chamber 5.
Insure the 2 bolts used to attach the pump lever to the pump shaft are tight.
Water Pump Shaft Bearing - manufacturer, factory, supplier from China.
On 3ø models fasten the impeller washer with the impeller screw to the pump shaft.
The oil pump is driven as the pump shaft 97 rotates.
Rotate the pump shaft so the piston ( 5 ) is in the top.
Install selected Hydro-Tek pump such that the pump shaft is aligned in the.
Pump shaft 24 provides an input shaft for operation of pump 12.
These applications include valve bodies, various mixer shafts, and pump shaft applications.
JM - The letters “ JM ” designate a special pump shaft originally designed for a “ mechanical seal ”.
A shaft seal device 6 is mounted between said rear wall and the pump shaft.
The seal element 14 is axially displaceable on the pump shaft 5 towards the stationary seal element 13.
You'll also be interested in:
Examples of using Shaft
Show more
This is the shaft of the pry bar
Shaft seal depends on water for lubrication
Blind hollow shaft or hollow through shaft
Examples of using Pump
Show more
Clean the pump at least twice a year
Check that the drain pump is level
However the pump can be activated in commissioning
