Examples of 'pump starts' in a sentence
Meaning of "pump starts"
The phrase 'pump starts' usually refers to the activation or initiation of a pump, which is a device used to move fluids or gases. In this context, 'pump starts' indicates the beginning of the pumping process, where the pump's mechanism is set in motion to transfer the desired substance. This phrase is commonly used in mechanical engineering, plumbing, or fluid dynamics
How to use "pump starts" in a sentence
Basic
Advanced
pump starts
Pump starts and stops too often.
The drain pump starts and then.
Pump starts but delivers little or no flow.
It closes again as soon as the pump starts up.
The pump starts when no water is consumed.
Continue to hold bag until vacuum pump starts.
The water pump starts to pump water.
And it provides more consistent pressure in between pump starts.
The pump starts but immediately stops.
The purge valve opens and the water pump starts.
Oil pump starts automatically on first use.
Open the recirculation tap to check whether the pump starts up.
The pump starts to inflate the cuff.
Brace yourself for possible gun kickback when the pump starts.
The pump starts working and steam is generated.
See also
It provides water pressure to the system while reducing the pump starts.
The pump starts operating as soon as an actuator is active.
Afterward, the heat pump starts to work again.
The pump starts and stops too frequently.
During this dispensing cycle, the pump starts up.
The circulating pump starts with a slight delay.
Pump starts then stops again shortly afterwards in standalone operation.
If the active pump fails, the inactive pump starts up automatically.
My pump starts and stops a lot.
When the condensate enters the tank, the pump starts up.
Drain pump starts and stops severaltimes during eachdrain.
A three-second tone will sound every time the pump starts.
The pump starts but the oil is not pressurised.
When there is a heat requirement, the circulation pump starts up before the vessel.
The pump starts to work when the bucket is full.
When the room thermostat calls for heat, the circulation pump starts.
Pump starts frequently.
When the inlet air temperature rises, the water pump starts functioning normally.
The heating pump starts functioning after the time delay is finished.
Feed pump at minimum pressure and check if the pump starts without the outlet pipe ;.
The heat pump starts after the set pump forerun has expired.
To check the pump 's operation, fill the sump pit with water until the pump starts.
The breast pump starts in a gentle mode that helps to stimulate your milk flow.
It sets the enable delay time, the fixed-speed pump starts after the selected time.
The pump starts again when the time is within the configured comfort period.
By pressing ENTER, the pump starts automatic filling of boilers.
The pump starts up when the return temperature falls below the set starting temperature.
Insert the plug in the socket. The pump starts working immediately.
Pump starts and stops Backflow of water from piping.
Press the ON / OFF button as well until the pump starts.
The water pump starts after the Prechill.
When the water temperature in the tank reaches 65 C, the heat pump starts functioning normally.
System Test Pump starts and all LEDs light up.
Delay Between Starts The minimum delay ( in seconds ) between pump starts.
As the pump starts to gradually lead, it requires regular qi.
You'll also be interested in:
Examples of using Starts
Show more
My heart starts to beat to beat the band
A few instructions just before rehearsal starts
The compressor starts after a period of time
Examples of using Pump
Show more
Clean the pump at least twice a year
Check that the drain pump is level
However the pump can be activated in commissioning
